Daily Papers

We analyze automatic speech recognition (ASR) modeling choices under domain mismatch, comparing classic modular and novel sequence-to-sequence (seq2seq) architectures. Across the different ASR architectures, we examine a spectrum of modeling choices, including label units, context length, and topology. To isolate language domain effects from acoustic variation, we synthesize target domain audio using a text-to-speech system trained on LibriSpeech. We incorporate target domain n-gram and neural language models for domain adaptation without retraining the acoustic model. To our knowledge, this is the first controlled comparison of optimized ASR systems across state-of-the-art architectures under domain shift, offering insights into their generalization. The results show that, under domain shift, rather than the decoder architecture choice or the distinction between classic modular and novel seq2seq models, it is specific modeling choices that influence performance.

Spontaneous speech emotion data usually contain perceptual grades where graders assign emotion score after listening to the speech files. Such perceptual grades introduce uncertainty in labels due to grader opinion variation. Grader variation is addressed by using consensus grades as groundtruth, where the emotion with the highest vote is selected. Consensus grades fail to consider ambiguous instances where a speech sample may contain multiple emotions, as captured through grader opinion uncertainty. We demonstrate that using the probability density function of the emotion grades as targets instead of the commonly used consensus grades, provide better performance on benchmark evaluation sets compared to results reported in the literature. We show that a saliency driven foundation model (FM) representation selection helps to train a state-of-the-art speech emotion model for both dimensional and categorical emotion recognition. Comparing representations obtained from different FMs, we observed that focusing on overall test-set performance can be deceiving, as it fails to reveal the models generalization capacity across speakers and gender. We demonstrate that performance evaluation across multiple test-sets and performance analysis across gender and speakers are useful in assessing usefulness of emotion models. Finally, we demonstrate that label uncertainty and data-skew pose a challenge to model evaluation, where instead of using the best hypothesis, it is useful to consider the 2- or 3-best hypotheses.

Recent advances in AudioLLMs have enabled spoken dialogue systems to move beyond turn-based interaction toward real-time full-duplex communication, where the agent must decide when to speak, yield, or interrupt while the user is still talking. Existing full-duplex approaches either rely on voice activity cues, which lack semantic understanding, or on ASR-based modules, which introduce latency and degrade under overlapping speech and noise. Moreover, available datasets rarely capture realistic interaction dynamics, limiting evaluation and deployment. To mitigate the problem, we propose FastTurn, a unified framework for low-latency and robust turn detection. To advance latency while maintaining performance, FastTurn combines streaming CTC decoding with acoustic features, enabling early decisions from partial observations while preserving semantic cues. We also release a test set based on real human dialogue, capturing authentic turn transitions, overlapping speech, backchannels, pauses, pitch variation, and environmental noise. Experiments show FastTurn achieves higher decision accuracy with lower interruption latency than representative baselines and remains robust under challenging acoustic conditions, demonstrating its effectiveness for practical full-duplex dialogue systems.

Recent advances in Audio LLMs have achieved human-level speech recognition, yet existing systems struggle to capture paralinguistic aspects such as speaker traits, expressive variations, and environmental acoustic conditions. To address this, we design a framework of 22 paralinguistic characteristics and create a dataset of over 1.2M Audio-QA pairs. We develop ParA-LLM, trained with a two-stage curriculum: first on single-attribute questions to build foundational knowledge, then on multi-attribute questions for joint reasoning over speaker and acoustic characteristics. We also release ParA-Bench, a benchmark of 6,000 multiple-choice questions across speaker-speech, acoustic, and mixed categories, where frontier models like GPT-4o-Audio achieve only 36% accuracy. ParA-LLM surpasses state-of-the-art Audio LLMs like GPT-4o-Audio by 7.5% on ParA-Bench, with additional gains of 1.13% on MMAU-Pro Speech and 7.49% on MMAR Speech.

Detecting unauthorized UAV flights is critical for surveillance, security, and airspace management. Acoustic drone detection, which relies on the distinctive propeller and motor sounds of UAVs, provides a low-cost, passive solution that requires no line of sight. A central challenge is generalization: reliably distinguishing drone signatures from ambient noise across unseen recording setups, environments, and UAV types (out-of-domain). Inspired by advances in large-scale audio pretraining, we develop a compact DNN-based detector and improve its generalization by (1) pretraining the model for broad sound-event classification before fine-tuning on diverse in-house and public drone recordings, and (2) applying on-the-fly augmentations (pitch shifting, noise mixing, microphone transfer function simulation, spectrogram augmentation) to expose the model to varied acoustic conditions. An ablation study quantifies the impact of each augmentation. For evaluation, we set target false-positive rates (FPR) aligned with real-world surveillance needs and report true-positive rates (TPR) on both in-domain data (public IDMT Berne 2022) and out-of-domain data (public AuDroK). Our results show that pretraining is the dominant factor for robust detection, yielding substantial TPR improvements over training from scratch on all benchmarks. The full augmentation chain provides additional gains on acoustically mismatched out-of-domain data, achieving the best mean TPR on the AuDroK subsets and the largest improvements on the most challenging scenarios. We further validate real-world applicability by measuring false positives on public non-drone corpora (IDMT-TRAFFIC and ESC-50), demonstrating equally low FPR on unfamiliar backgrounds. A distance-dependent analysis on IDMT Berne 2022 shows effective detection at distances up to 150 m.

Despite decades of research on reverberant speech, comparing methods remains difficult because most corpora lack per-file acoustic annotations or provide limited documentation for reproduction. We present RIR-Mega-Speech, a corpus of approximately 117.5 hours created by convolving LibriSpeech utterances with roughly 5,000 simulated room impulse responses from the RIR-Mega collection. Every file includes RT60, direct-to-reverberant ratio (DRR), and clarity index (C_{50}) computed from the source RIR using clearly defined, reproducible procedures. We also provide scripts to rebuild the dataset and reproduce all evaluation results. Using Whisper small on 1,500 paired utterances, we measure 5.20% WER (95% CI: 4.69--5.78) on clean speech and 7.70% (7.04--8.35) on reverberant versions, corresponding to a paired increase of 2.50 percentage points (2.06--2.98). This represents a 48% relative degradation. WER increases monotonically with RT60 and decreases with DRR, consistent with prior perceptual studies. While the core finding that reverberation harms recognition is well established, we aim to provide the community with a standardized resource where acoustic conditions are transparent and results can be verified independently. The repository includes one-command rebuild instructions for both Windows and Linux environments.

Large Language Models (LLMs) have recently shown remarkable ability to process not only text but also multimodal inputs such as speech and audio. However, most existing models primarily focus on analyzing input signals using text instructions, overlooking scenarios in which speech instructions and audio are mixed and serve as inputs to the model. To address these challenges, we introduce Solla, a novel framework designed to understand speech-based questions and hear the acoustic context concurrently. Solla incorporates an audio tagging module to effectively identify and represent audio events, as well as an ASR-assisted prediction method to improve comprehension of spoken content. To rigorously evaluate Solla and other publicly available models, we propose a new benchmark dataset called SA-Eval, which includes three tasks: audio event classification, audio captioning, and audio question answering. SA-Eval has diverse speech instruction with various speaking styles, encompassing two difficulty levels, easy and hard, to capture the range of real-world acoustic conditions. Experimental results show that Solla performs on par with or outperforms baseline models on both the easy and hard test sets, underscoring its effectiveness in jointly understanding speech and audio.

Target identification of ship-radiated noise is a crucial area in underwater target recognition. However, there is currently a lack of multi-target ship datasets that accurately represent real-world underwater acoustic conditions. To tackle this issue, we conducted experimental data acquisition, resulting in the release of QiandaoEar22 \textemdash a comprehensive underwater acoustic multi-target dataset. This dataset encompasses 9 hours and 28 minutes of real-world ship-radiated noise data and 21 hours and 58 minutes of background noise data. To demonstrate the availability of QiandaoEar22, we executed two experimental tasks. The first task focuses on assessing the presence of ship-radiated noise, while the second task involves identifying specific ships within the recognized targets in the multi-ship mixed data. In the latter task, we extracted eight features from the data and employed six deep learning networks for classification, aiming to evaluate and compare the performance of various features and networks. The experimental results reveal that ship-radiated noise can be successfully identified from background noise in over 99\% of cases. Additionally, for the specific identification of individual ships, the optimal recognition accuracy achieves 99.56\%. Finally, based on our findings, we provide advice on selecting appropriate features and deep learning networks, which may offer valuable insights for related research. Our work not only establishes a benchmark for algorithm evaluation but also inspires the development of innovative methods to enhance UATD and UATR systems.

We show how replay attacks undermine audio deepfake detection: By playing and re-recording deepfake audio through various speakers and microphones, we make spoofed samples appear authentic to the detection model. To study this phenomenon in more detail, we introduce ReplayDF, a dataset of recordings derived from M-AILABS and MLAAD, featuring 109 speaker-microphone combinations across six languages and four TTS models. It includes diverse acoustic conditions, some highly challenging for detection. Our analysis of six open-source detection models across five datasets reveals significant vulnerability, with the top-performing W2V2-AASIST model's Equal Error Rate (EER) surging from 4.7% to 18.2%. Even with adaptive Room Impulse Response (RIR) retraining, performance remains compromised with an 11.0% EER. We release ReplayDF for non-commercial research use.

Latest advances in deep spatial filtering for Ambisonics demonstrate strong performance in stationary multi-speaker scenarios by rotating the sound field toward a target speaker prior to multi-channel enhancement. For applicability in dynamic acoustic conditions with moving speakers, we propose to automate this rotary steering using an interleaved tracking algorithm conditioned on the target's initial direction. However, for nearby or crossing speakers, robust tracking becomes difficult and spatial cues less effective for enhancement. By incorporating the processed recording as additional guide into both algorithms, our novel joint autoregressive framework leverages temporal-spectral correlations of speech to resolve spatially challenging speaker constellations. Consequently, our proposed method significantly improves tracking and enhancement of closely spaced speakers, consistently outperforming comparable non-autoregressive methods on a synthetic dataset. Real-world recordings complement these findings in complex scenarios with multiple speaker crossings and varying speaker-to-array distances.

This paper investigates the joint localization, detection, and tracking of sound events using a convolutional recurrent neural network (CRNN). We use a CRNN previously proposed for the localization and detection of stationary sources, and show that the recurrent layers enable the spatial tracking of moving sources when trained with dynamic scenes. The tracking performance of the CRNN is compared with a stand-alone tracking method that combines a multi-source (DOA) estimator and a particle filter. Their respective performance is evaluated in various acoustic conditions such as anechoic and reverberant scenarios, stationary and moving sources at several angular velocities, and with a varying number of overlapping sources. The results show that the CRNN manages to track multiple sources more consistently than the parametric method across acoustic scenarios, but at the cost of higher localization error.

Custom voice, a specific text to speech (TTS) service in commercial speech platforms, aims to adapt a source TTS model to synthesize personal voice for a target speaker using few speech data. Custom voice presents two unique challenges for TTS adaptation: 1) to support diverse customers, the adaptation model needs to handle diverse acoustic conditions that could be very different from source speech data, and 2) to support a large number of customers, the adaptation parameters need to be small enough for each target speaker to reduce memory usage while maintaining high voice quality. In this work, we propose AdaSpeech, an adaptive TTS system for high-quality and efficient customization of new voices. We design several techniques in AdaSpeech to address the two challenges in custom voice: 1) To handle different acoustic conditions, we use two acoustic encoders to extract an utterance-level vector and a sequence of phoneme-level vectors from the target speech during training; in inference, we extract the utterance-level vector from a reference speech and use an acoustic predictor to predict the phoneme-level vectors. 2) To better trade off the adaptation parameters and voice quality, we introduce conditional layer normalization in the mel-spectrogram decoder of AdaSpeech, and fine-tune this part in addition to speaker embedding for adaptation. We pre-train the source TTS model on LibriTTS datasets and fine-tune it on VCTK and LJSpeech datasets (with different acoustic conditions from LibriTTS) with few adaptation data, e.g., 20 sentences, about 1 minute speech. Experiment results show that AdaSpeech achieves much better adaptation quality than baseline methods, with only about 5K specific parameters for each speaker, which demonstrates its effectiveness for custom voice. Audio samples are available at https://speechresearch.github.io/adaspeech/.

As the size of pre-trained speech recognition models increases, running these large models in low-latency or resource-constrained environments becomes challenging. In this work, we leverage pseudo-labelling to assemble a large-scale open-source dataset which we use to distill the Whisper model into a smaller variant, called Distil-Whisper. Using a simple word error rate (WER) heuristic, we select only the highest quality pseudo-labels for training. The distilled model is 5.8 times faster with 51% fewer parameters, while performing to within 1% WER on out-of-distribution test data in a zero-shot transfer setting. Distil-Whisper maintains the robustness of the Whisper model to difficult acoustic conditions, while being less prone to hallucination errors on long-form audio. Distil-Whisper is designed to be paired with Whisper for speculative decoding, yielding a 2 times speed-up while mathematically ensuring the same outputs as the original model. To facilitate further research in this domain, we make our training code, inference code and models publicly accessible.

Music is an integral part of human culture, embodying human intelligence and creativity, of which songs compose an essential part. While various aspects of song generation have been explored by previous works, such as singing voice, vocal composition and instrumental arrangement, etc., generating songs with both vocals and accompaniment given lyrics remains a significant challenge, hindering the application of music generation models in the real world. In this light, we propose SongCreator, a song-generation system designed to tackle this challenge. The model features two novel designs: a meticulously designed dual-sequence language model (DSLM) to capture the information of vocals and accompaniment for song generation, and an additional attention mask strategy for DSLM, which allows our model to understand, generate and edit songs, making it suitable for various song-related generation tasks. Extensive experiments demonstrate the effectiveness of SongCreator by achieving state-of-the-art or competitive performances on all eight tasks. Notably, it surpasses previous works by a large margin in lyrics-to-song and lyrics-to-vocals. Additionally, it is able to independently control the acoustic conditions of the vocals and accompaniment in the generated song through different prompts, exhibiting its potential applicability. Our samples are available at https://songcreator.github.io/.

Large Audio-Language Models (LALMs) integrate audio perception and language understanding within a unified framework, enabling a wide range of real-world applications. Despite recent advances, evaluation for LALMs remains heavily underspecified relative to real-world requirements: most lack true linguistic and cultural authenticity, while others fail to capture acoustic realism. To bridge this gap, we propose GlobeAudio, a multilingual and multicultural benchmark designed to evaluate naturalistic audio understanding. GlobeAudio consists of 5,637 multiple-choice questions across six typologically diverse languages, expertly crafted by native speakers grounded on naturally occurring audio. In order to do well, models must possess higher-level auditory reasoning skills and culturally grounded interpretation. We systematically evaluate representative closed-source and open-source LALMs, as well as cascaded ASR-LLM pipelines. Our experiments reveal substantial performance gaps under natural acoustic conditions, particularly for open-source models and low-resource languages. These findings highlight critical limitations of current LALMs and underscore the importance of naturalistic audio evaluation for future audio-language systems. GlobeAudio can be found at https://huggingface.co/datasets/iNLP-Lab/GlobeAudio .

Audio-language models (ALMs) are increasingly used in real-world applications that require understanding music, from music tutoring and transcription to captioning, recommendation systems, and music production. More broadly, they are becoming an important component of multimodal AI systems that must reason from sensory input rather than text alone. This makes reliable musical perception a critical prerequisite: if a model cannot accurately hear the structure of sound, it cannot be trusted to reason about, teach, transcribe, or act on audio in the real world. Yet existing benchmarks rarely assess one of the most fundamental musical abilities underlying such perception: pitch hearing. Current evaluations tend to probe pitch hearing only indirectly, through higher-level tasks and often in multiple-choice formats, leaving open how reliably ALMs identify fine-grained pitch across instruments, acoustic conditions, and response formats. We introduce PitchBench, an evaluation suite that systematically measures pitch hearing in ALMs. PitchBench comprises 28 experiments spanning absolute and relative pitch perception within sequences and chords, while varying loudness, note duration, sound source, time stretching, background noise, and other acoustic conditions. Tasks range from identifying individual pitches in isolation to tracking a melodic line within a four-part musical texture. Evaluating frontier ALMs, we find that pitch hearing remains highly unreliable: models perform consistently poorly across settings, with accuracy varying sharply by sound source, note duration, and notation format. Current ALMs do not yet possess stable pitch perception, even for controlled synthetic and instrumental stimuli. Alongside the benchmark, we release PitchBench as a Python package containing the evaluation data and data generation tools to support future work on pitch-aware audio-language modeling.

Lattices are compact representations that encode multiple hypotheses, such as speech recognition results or different word segmentations. It is shown that encoding lattices as opposed to 1-best results generated by automatic speech recognizer (ASR) boosts the performance of spoken language understanding (SLU). Recently, pretrained language models with the transformer architecture have achieved the state-of-the-art results on natural language understanding, but their ability of encoding lattices has not been explored. Therefore, this paper aims at adapting pretrained transformers to lattice inputs in order to perform understanding tasks specifically for spoken language. Our experiments on the benchmark ATIS dataset show that fine-tuning pretrained transformers with lattice inputs yields clear improvement over fine-tuning with 1-best results. Further evaluation demonstrates the effectiveness of our methods under different acoustic conditions. Our code is available at https://github.com/MiuLab/Lattice-SLU

Zero-shot voice conversion (VC) aims to convert a source utterance into the voice of an unseen target speaker while preserving its linguistic content. Although recent systems have improved conversion quality, building zero-shot VC systems for interactive scenarios remains challenging because high-fidelity speaker transfer and low-latency streaming inference are difficult to achieve simultaneously. In this work, we present X-VC, a zero-shot streaming VC system that performs one-step conversion in the latent space of a pretrained neural codec. X-VC uses a dual-conditioning acoustic converter that jointly models source codec latents and frame-level acoustic conditions derived from target reference speech, while injecting utterance-level target speaker information through adaptive normalization. To reduce the mismatch between training and inference, we train the model with generated paired data and a role-assignment strategy that combines standard, reconstruction, and reversed modes. For streaming inference, we further adopt a chunkwise inference scheme with overlap smoothing that is aligned with the segment-based training paradigm of the codec. Experiments on Seed-TTS-Eval show that X-VC achieves the best streaming WER in both English and Chinese, strong speaker similarity in same-language and cross-lingual settings, and substantially lower offline real-time factor than the compared baselines. These results suggest that codec-space one-step conversion is a practical approach for building high-quality low-latency zero-shot VC systems. Audio samples are available at https://x-vc.github.io. Our code and checkpoints will also be released.

This work presents a speech-to-text system "Pisets" for scientists and journalists which is based on a three-component architecture aimed at improving speech recognition accuracy while minimizing errors and hallucinations associated with the Whisper model. The architecture comprises primary recognition using Wav2Vec2, false positive filtering via the Audio Spectrogram Transformer (AST), and final speech recognition through Whisper. The implementation of curriculum learning methods and the utilization of diverse Russian-language speech corpora significantly enhanced the system's effectiveness. Additionally, advanced uncertainty modeling techniques were introduced, contributing to further improvements in transcription quality. The proposed approaches ensure robust transcribing of long audio data across various acoustic conditions compared to WhisperX and the usual Whisper model. The source code of "Pisets" system is publicly available at GitHub: https://github.com/bond005/pisets.

Audio-visual speech enhancement under real-world conditions remains challenging due to unreliable visual inputs and the lack of large-scale training data with realistic acoustic conditions. Existing approaches usually fuse visual features directly into the separation network, making them vulnerable to degraded visual signals. In this paper, we present DAVE, a decoupled audio-visual enhancement framework for real-world speech separation. Firstly, to address the data scarcity issue, we construct DAVE-Corpus, a large-scale training corpus with 219,411 mixtures generated from public meeting corpora through combinatorial acoustic augmentation. Then, we introduce a progressive multi-objective optimization strategy to jointly improve speech separation, intelligibility, speaker identity preservation, and perceptual quality. We further develop a certified selective enhancement chain that applies scene routing, GAN-based denoising, and loudness normalization only within the no-reference partition, guaranteeing non-degradation of reference-based metrics. Experimental results on the Real-World Audio-Visual Speech Enhancement Challenge demonstrate the robustness of DAVE under both real-world mixed scenarios and visual degradation conditions.

Diffusion-based generative models have recently achieved remarkable results in speech and vocal enhancement due to their ability to model complex speech data distributions. While these models generalize well to unseen acoustic environments, they may not achieve the same level of fidelity as the discriminative models specifically trained to enhance particular acoustic conditions. In this paper, we propose Ex-Diff, a novel score-based diffusion model that integrates the latent representations produced by a discriminative model to improve speech and vocal enhancement, which combines the strengths of both generative and discriminative models. Experimental results on the widely used MUSDB dataset show relative improvements of 3.7% in SI-SDR and 10.0% in SI-SIR compared to the baseline diffusion model for speech and vocal enhancement tasks, respectively. Additionally, case studies are provided to further illustrate and analyze the complementary nature of generative and discriminative models in this context.

Speaker diarization(SD) is a classic task in speech processing and is crucial in multi-party scenarios such as meetings and conversations. Current mainstream speaker diarization approaches consider acoustic information only, which result in performance degradation when encountering adverse acoustic conditions. In this paper, we propose methods to extract speaker-related information from semantic content in multi-party meetings, which, as we will show, can further benefit speaker diarization. We introduce two sub-tasks, Dialogue Detection and Speaker-Turn Detection, in which we effectively extract speaker information from conversational semantics. We also propose a simple yet effective algorithm to jointly model acoustic and semantic information and obtain speaker-identified texts. Experiments on both AISHELL-4 and AliMeeting datasets show that our method achieves consistent improvements over acoustic-only speaker diarization systems.

Current fake audio detection algorithms have achieved promising performances on most datasets. However, their performance may be significantly degraded when dealing with audio of a different dataset. The orthogonal weight modification to overcome catastrophic forgetting does not consider the similarity of genuine audio across different datasets. To overcome this limitation, we propose a continual learning algorithm for fake audio detection to overcome catastrophic forgetting, called Regularized Adaptive Weight Modification (RAWM). When fine-tuning a detection network, our approach adaptively computes the direction of weight modification according to the ratio of genuine utterances and fake utterances. The adaptive modification direction ensures the network can effectively detect fake audio on the new dataset while preserving its knowledge of old model, thus mitigating catastrophic forgetting. In addition, genuine audio collected from quite different acoustic conditions may skew their feature distribution, so we introduce a regularization constraint to force the network to remember the old distribution in this regard. Our method can easily be generalized to related fields, like speech emotion recognition. We also evaluate our approach across multiple datasets and obtain a significant performance improvement on cross-dataset experiments.

We propose a novel text-to-speech (TTS) framework centered around a neural transducer. Our approach divides the whole TTS pipeline into semantic-level sequence-to-sequence (seq2seq) modeling and fine-grained acoustic modeling stages, utilizing discrete semantic tokens obtained from wav2vec2.0 embeddings. For a robust and efficient alignment modeling, we employ a neural transducer named token transducer for the semantic token prediction, benefiting from its hard monotonic alignment constraints. Subsequently, a non-autoregressive (NAR) speech generator efficiently synthesizes waveforms from these semantic tokens. Additionally, a reference speech controls temporal dynamics and acoustic conditions at each stage. This decoupled framework reduces the training complexity of TTS while allowing each stage to focus on semantic and acoustic modeling. Our experimental results on zero-shot adaptive TTS demonstrate that our model surpasses the baseline in terms of speech quality and speaker similarity, both objectively and subjectively. We also delve into the inference speed and prosody control capabilities of our approach, highlighting the potential of neural transducers in TTS frameworks.

We introduce TitaNet-LID, a compact end-to-end neural network for Spoken Language Identification (LID) that is based on the ContextNet architecture. TitaNet-LID employs 1D depth-wise separable convolutions and Squeeze-and-Excitation layers to effectively capture local and global context within an utterance. Despite its small size, TitaNet-LID achieves performance similar to state-of-the-art models on the VoxLingua107 dataset while being 10 times smaller. Furthermore, it can be easily adapted to new acoustic conditions and unseen languages through simple fine-tuning, achieving a state-of-the-art accuracy of 88.2% on the FLEURS benchmark. Our model is scalable and can achieve a better trade-off between accuracy and speed. TitaNet-LID performs well even on short utterances less than 5s in length, indicating its robustness to input length.

Vibravox is a dataset compliant with the General Data Protection Regulation (GDPR) containing audio recordings using five different body-conduction audio sensors : two in-ear microphones, two bone conduction vibration pickups and a laryngophone. The data set also includes audio data from an airborne microphone used as a reference. The Vibravox corpus contains 38 hours of speech samples and physiological sounds recorded by 188 participants under different acoustic conditions imposed by an high order ambisonics 3D spatializer. Annotations about the recording conditions and linguistic transcriptions are also included in the corpus. We conducted a series of experiments on various speech-related tasks, including speech recognition, speech enhancement and speaker verification. These experiments were carried out using state-of-the-art models to evaluate and compare their performances on signals captured by the different audio sensors offered by the Vibravox dataset, with the aim of gaining a better grasp of their individual characteristics.

This report presents the dataset and the evaluation setup of the Sound Event Localization & Detection (SELD) task for the DCASE 2020 Challenge. The SELD task refers to the problem of trying to simultaneously classify a known set of sound event classes, detect their temporal activations, and estimate their spatial directions or locations while they are active. To train and test SELD systems, datasets of diverse sound events occurring under realistic acoustic conditions are needed. Compared to the previous challenge, a significantly more complex dataset was created for DCASE 2020. The two key differences are a more diverse range of acoustical conditions, and dynamic conditions, i.e. moving sources. The spatial sound scenes are created using real room impulse responses captured in a continuous manner with a slowly moving excitation source. Both static and moving sound events are synthesized from them. Ambient noise recorded on location is added to complete the generation of scene recordings. A baseline SELD method accompanies the dataset, based on a convolutional recurrent neural network, to provide benchmark scores for the task. The baseline is an updated version of the one used in the previous challenge, with input features and training modifications to improve its performance.

Recent multi-modal Large Language Models (LLMs) such as GPT-4o have demonstrated strong capabilities of direct speech interaction. However, the lack of specialized and comprehensive benchmarks for end-to-end speech LLM evaluation hinders optimizing the user experience of Audio LLMs in real-world applications. Existing evaluation methods often adapt text-based benchmarks, overlooking speech's unique characteristics and challenges, including prosody, homophones, stuttering, and differing user expectations. Here, we present a novel approach to thoroughly evaluate LLMs in practical speech conversations. We systematically curate real-world chat data relevant to spoken scenarios, introduce diversity in speaker attributes and acoustic conditions, and augment the dataset with speech-specific phenomena. We further design a query-aware evaluation method to use customized evaluation checklists and prompts to enhance the accuracy of automatic evaluation. We conduct comprehensive testing and detailed analysis of various mainstream speech models, revealing significant differences in model performance across different speech scenarios. The use of query-aware evaluation further enables a finer-grained assessment under various speech-specific scenarios. Our benchmark can provide valuable insights for speech model development and evaluation.

We introduce LRS-VoxMM, an in-the-wild benchmark for audio-visual speech recognition (AVSR). The benchmark is derived from VoxMM, a dataset of diverse real-world spoken conversations with human-annotated transcriptions. We select AVSR-suitable samples and preprocess them in an LRS-style format for direct use in existing AVSR pipelines. Compared with commonly used benchmarks, LRS-VoxMM covers a more diverse range of scenarios and acoustic conditions. We also release distorted evaluation sets with additive noise, reverberation, and bandwidth limitation to support evaluation under severe acoustic degradation. Experimental results show that LRS-VoxMM is considerably harder than LRS3 and that the contribution of visual information becomes more evident as the audio signal degrades. LRS-VoxMM supports more realistic AVSR benchmarking and encourages further research on the role of visual information in challenging real-world conditions.

Recent advances in Automatic Speech Recognition (ASR) and Large Language Models (LLMs) have significantly improved speech understanding capabilities. However, multi-speaker speech transcription remains challenging task, constrained by highly similar speaker voices, rapid turn-taking transitions, overlapping utterances and inaccurate speaker boundary segmentation. These challenges become particularly pronounced in real-world conversational audio, where speaker dynamics and acoustic conditions are highly variable. This technical report presents SoulX-Transcriber, a unified multi-speaker transcription system that jointly models speaker diarization (SD) and ASR within an LLM-based framework. SoulX-Transcriber adopts a two-stage training strategy to improve both speaker discrimination and transcription robustness. In the first stage, speaker-aware multi-task continuous pre-training enhances speaker representation learning and boundary perception. In the second stage, supervised fine-tuning further optimizes the model for accurate end-to-end speaker-attributed transcription under complex multi-speaker conditions. SoulX-Transcriber delivers strong performance and robustness across multiple public benchmarks, including AliMeeting, AISHELL-4, and AMI, while maintaining high adaptability to multi-domain scenarios.

Recent advancements in integrating speech information into large language models (LLMs) have significantly improved automatic speech recognition (ASR) accuracy. However, existing methods often constrained by the capabilities of the speech encoders under varied acoustic conditions, such as accents. To address this, we propose LA-RAG, a novel Retrieval-Augmented Generation (RAG) paradigm for LLM-based ASR. LA-RAG leverages fine-grained token-level speech datastores and a speech-to-speech retrieval mechanism to enhance ASR accuracy via LLM in-context learning (ICL) capabilities. Experiments on Mandarin and various Chinese dialect datasets demonstrate significant improvements in ASR accuracy compared to existing methods, validating the effectiveness of our approach, especially in handling accent variations.

ASVspoof 5 is the fifth edition in a series of challenges which promote the study of speech spoofing and deepfake attacks as well as the design of detection solutions. We introduce the ASVspoof 5 database which is generated in a crowdsourced fashion from data collected in diverse acoustic conditions (cf. studio-quality data for earlier ASVspoof databases) and from ~2,000 speakers (cf. ~100 earlier). The database contains attacks generated with 32 different algorithms, also crowdsourced, and optimised to varying degrees using new surrogate detection models. Among them are attacks generated with a mix of legacy and contemporary text-to-speech synthesis and voice conversion models, in addition to adversarial attacks which are incorporated for the first time. ASVspoof 5 protocols comprise seven speaker-disjoint partitions. They include two distinct partitions for the training of different sets of attack models, two more for the development and evaluation of surrogate detection models, and then three additional partitions which comprise the ASVspoof 5 training, development and evaluation sets. An auxiliary set of data collected from an additional 30k speakers can also be used to train speaker encoders for the implementation of attack algorithms. Also described herein is an experimental validation of the new ASVspoof 5 database using a set of automatic speaker verification and spoof/deepfake baseline detectors. With the exception of protocols and tools for the generation of spoofed/deepfake speech, the resources described in this paper, already used by participants of the ASVspoof 5 challenge in 2024, are now all freely available to the community.

Despite the growing interest in unsupervised learning, extracting meaningful knowledge from unlabelled audio remains an open challenge. To take a step in this direction, we recently proposed a problem-agnostic speech encoder (PASE), that combines a convolutional encoder followed by multiple neural networks, called workers, tasked to solve self-supervised problems (i.e., ones that do not require manual annotations as ground truth). PASE was shown to capture relevant speech information, including speaker voice-print and phonemes. This paper proposes PASE+, an improved version of PASE for robust speech recognition in noisy and reverberant environments. To this end, we employ an online speech distortion module, that contaminates the input signals with a variety of random disturbances. We then propose a revised encoder that better learns short- and long-term speech dynamics with an efficient combination of recurrent and convolutional networks. Finally, we refine the set of workers used in self-supervision to encourage better cooperation. Results on TIMIT, DIRHA and CHiME-5 show that PASE+ significantly outperforms both the previous version of PASE as well as common acoustic features. Interestingly, PASE+ learns transferable representations suitable for highly mismatched acoustic conditions.

We propose HuPER, a human-inspired framework that models phonetic perception as adaptive inference over acoustic-phonetics evidence and linguistic knowledge. With only 100 hours of training data, HuPER achieves state-of-the-art phonetic error rates on five English benchmarks and strong zero-shot transfer to 95 unseen languages. HuPER is also the first framework to enable adaptive, multi-path phonetic perception under diverse acoustic conditions. All training data, models, and code are open-sourced. Code and demo avaliable at https://github.com/HuPER29/HuPER.

Massively multilingual automatic speech recognition (ASR) models covering hundreds of languages must maintain robust performance across diverse linguistic and acoustic conditions. However, these models often encounter the curse of multilinguality, where model capacity is diluted across languages. To address this challenge, we propose Mixture of Language Group Experts (MoLGE), built upon speech self-supervised models (S3Ms). MoLGE assigns dedicated expert modules to clusters of similar languages, reducing the number of required submodules compared to conventional language-specific Mixture-of-Experts (MoE) schemes. It further integrates a hierarchical Low-Rank Adaptation (LoRA) strategy into the disentangled acoustic and linguistic components of the S3M architecture, enabling efficient modeling of language-specific characteristics while maintaining parameter efficiency. Further, we investigate the impact of language grouping strategies based on both linguistic and data-driven criteria on overall performance, providing an interpretable perspective on how language structure influences scalability in multilingual speech systems. In experiments, we evaluate MoLGE on a multilingual benchmark encompassing 495 languages. Results demonstrate that MoLGE consistently outperforms dense multilingual baselines with a minimal increase in trainable parameters. Notably, these language grouping strategies yield substantial improvements for both phonetic and orthographic aspects of ASR modeling. Our findings suggest that structured language specialization provides an effective pathway for massively scaling language coverage of multilingual ASR.

In audio signal processing, learnable front-ends have shown strong performance across diverse tasks by optimizing task-specific representation. However, their parameters remain fixed once trained, lacking flexibility during inference and limiting robustness under dynamic complex acoustic environments. In this paper, we introduce a novel adaptive paradigm for audio front-ends that replaces static parameterization with a closed-loop neural controller. Specifically, we simplify the learnable front-end LEAF architecture and integrate a neural controller for adaptive representation via dynamically tuning Per-Channel Energy Normalization. The neural controller leverages both the current and the buffered past subband energies to enable input-dependent adaptation during inference. Experimental results on multiple audio classification tasks demonstrate that the proposed adaptive front-end consistently outperforms prior fixed and learnable front-ends under both clean and complex acoustic conditions. These results highlight neural adaptability as a promising direction for the next generation of audio front-ends.

This paper presents the Speech Technology Center (STC) replay attack detection systems proposed for Automatic Speaker Verification Spoofing and Countermeasures Challenge 2017. In this study we focused on comparison of different spoofing detection approaches. These were GMM based methods, high level features extraction with simple classifier and deep learning frameworks. Experiments performed on the development and evaluation parts of the challenge dataset demonstrated stable efficiency of deep learning approaches in case of changing acoustic conditions. At the same time SVM classifier with high level features provided a substantial input in the efficiency of the resulting STC systems according to the fusion systems results.

Voice cloning is a difficult task which requires robust and informative features incorporated in a high quality TTS system in order to effectively copy an unseen speaker's voice. In our work, we utilize features learned in a self-supervised framework via the Bootstrap Your Own Latent (BYOL) method, which is shown to produce high quality speech representations when specific audio augmentations are applied to the vanilla algorithm. We further extend the augmentations in the training procedure to aid the resulting features to capture the speaker identity and to make them robust to noise and acoustic conditions. The learned features are used as pre-trained utterance-level embeddings and as inputs to a Non-Attentive Tacotron based architecture, aiming to achieve multispeaker speech synthesis without utilizing additional speaker features. This method enables us to train our model in an unlabeled multispeaker dataset as well as use unseen speaker embeddings to copy a speaker's voice. Subjective and objective evaluations are used to validate the proposed model, as well as the robustness to the acoustic conditions of the target utterance.

We present SoundStorm, a model for efficient, non-autoregressive audio generation. SoundStorm receives as input the semantic tokens of AudioLM, and relies on bidirectional attention and confidence-based parallel decoding to generate the tokens of a neural audio codec. Compared to the autoregressive generation approach of AudioLM, our model produces audio of the same quality and with higher consistency in voice and acoustic conditions, while being two orders of magnitude faster. SoundStorm generates 30 seconds of audio in 0.5 seconds on a TPU-v4. We demonstrate the ability of our model to scale audio generation to longer sequences by synthesizing high-quality, natural dialogue segments, given a transcript annotated with speaker turns and a short prompt with the speakers' voices.

Audio-visual speaker diarization aims at detecting "who spoke when" using both auditory and visual signals. Existing audio-visual diarization datasets are mainly focused on indoor environments like meeting rooms or news studios, which are quite different from in-the-wild videos in many scenarios such as movies, documentaries, and audience sitcoms. To develop diarization methods for these challenging videos, we create the AVA Audio-Visual Diarization (AVA-AVD) dataset. Our experiments demonstrate that adding AVA-AVD into training set can produce significantly better diarization models for in-the-wild videos despite that the data is relatively small. Moreover, this benchmark is challenging due to the diverse scenes, complicated acoustic conditions, and completely off-screen speakers. As a first step towards addressing the challenges, we design the Audio-Visual Relation Network (AVR-Net) which introduces a simple yet effective modality mask to capture discriminative information based on face visibility. Experiments show that our method not only can outperform state-of-the-art methods but is more robust as varying the ratio of off-screen speakers. Our data and code has been made publicly available at https://github.com/showlab/AVA-AVD.

Text-to-speech models trained on large-scale datasets have demonstrated impressive in-context learning capabilities and naturalness. However, control of speaker identity and style in these models typically requires conditioning on reference speech recordings, limiting creative applications. Alternatively, natural language prompting of speaker identity and style has demonstrated promising results and provides an intuitive method of control. However, reliance on human-labeled descriptions prevents scaling to large datasets. Our work bridges the gap between these two approaches. We propose a scalable method for labeling various aspects of speaker identity, style, and recording conditions. We then apply this method to a 45k hour dataset, which we use to train a speech language model. Furthermore, we propose simple methods for increasing audio fidelity, significantly outperforming recent work despite relying entirely on found data. Our results demonstrate high-fidelity speech generation in a diverse range of accents, prosodic styles, channel conditions, and acoustic conditions, all accomplished with a single model and intuitive natural language conditioning. Audio samples can be heard at https://text-description-to-speech.com/.

Various applications of voice synthesis have been developed independently despite the fact that they generate "voice" as output in common. In addition, the majority of voice synthesis models currently rely on annotated audio data, but it is crucial to scale them to self-supervised datasets in order to effectively capture the wide range of acoustic variations present in human voice, including speaker identity, emotion, and prosody. In this work, we propose Make-A-Voice, a unified framework for synthesizing and manipulating voice signals from discrete representations. Make-A-Voice leverages a "coarse-to-fine" approach to model the human voice, which involves three stages: 1) semantic stage: model high-level transformation between linguistic content and self-supervised semantic tokens, 2) acoustic stage: introduce varying control signals as acoustic conditions for semantic-to-acoustic modeling, and 3) generation stage: synthesize high-fidelity waveforms from acoustic tokens. Make-A-Voice offers notable benefits as a unified voice synthesis framework: 1) Data scalability: the major backbone (i.e., acoustic and generation stage) does not require any annotations, and thus the training data could be scaled up. 2) Controllability and conditioning flexibility: we investigate different conditioning mechanisms and effectively handle three voice synthesis applications, including text-to-speech (TTS), voice conversion (VC), and singing voice synthesis (SVS) by re-synthesizing the discrete voice representations with prompt guidance. Experimental results demonstrate that Make-A-Voice exhibits superior audio quality and style similarity compared with competitive baseline models. Audio samples are available at https://Make-A-Voice.github.io

The development of speech understanding and generation has been significantly accelerated by the availability of large-scale, high-quality speech datasets. Among these, ASR and TTS are regarded as the most established and fundamental tasks. However, for Cantonese (Yue Chinese), spoken by approximately 84.9 million native speakers worldwide, limited annotated resources have hindered progress and resulted in suboptimal ASR and TTS performance. To address this challenge, we propose WenetSpeech-Pipe, an integrated pipeline for building large-scale speech corpus with multi-dimensional annotation tailored for speech understanding and generation. It comprises six modules: Audio Collection, Speaker Attributes Annotation, Speech Quality Annotation, Automatic Speech Recognition, Text Postprocessing and Recognizer Output Voting, enabling rich and high-quality annotations. Based on this pipeline, we release WenetSpeech-Yue, the first large-scale Cantonese speech corpus with multi-dimensional annotation for ASR and TTS, covering 21,800 hours across 10 domains with annotations including ASR transcription, text confidence, speaker identity, age, gender, speech quality scores, among other annotations. We also release WSYue-eval, a comprehensive Cantonese benchmark with two components: WSYue-ASR-eval, a manually annotated set for evaluating ASR on short and long utterances, code-switching, and diverse acoustic conditions, and WSYue-TTS-eval, with base and coverage subsets for standard and generalization testing. Experimental results show that models trained on WenetSpeech-Yue achieve competitive results against state-of-the-art (SOTA) Cantonese ASR and TTS systems, including commercial and LLM-based models, highlighting the value of our dataset and pipeline.

Audio classifiers frequently face domain shift, when models trained on one dataset lose accuracy on data recorded in acoustically different conditions. Previous Test-Time Adaptation (TTA) research in speech and sound analysis often evaluates models under fixed or mismatched noise settings, that fail to mimic real-world variability. To overcome these limitations, this paper presents DHAuDS (Dynamic and Heterogeneous Audio Domain Shift), a benchmark designed to assess TTA approaches under more realistic and diverse acoustic shifts. DHAuDS comprises four standardized benchmarks: UrbanSound8K-C, SpeechCommandsV2-C, VocalSound-C, and ReefSet-C, each constructed with dynamic corruption severity levels and heterogeneous noise types to simulate authentic audio degradation scenarios. The framework defines 14 evaluation criteria for each benchmark (8 for UrbanSound8K-C), resulting in 50 unrepeated criteria (124 experiments) that collectively enable fair, reproducible, and cross-domain comparison of TTA algorithms. Through the inclusion of dynamic and mixed-domain noise settings, DHAuDS offers a consistent and publicly reproducible testbed to support ongoing studies in robust and adaptive audio modeling.

In recent years, rapid progress has been made on the problem of single-channel sound separation using supervised training of deep neural networks. In such supervised approaches, a model is trained to predict the component sources from synthetic mixtures created by adding up isolated ground-truth sources. Reliance on this synthetic training data is problematic because good performance depends upon the degree of match between the training data and real-world audio, especially in terms of the acoustic conditions and distribution of sources. The acoustic properties can be challenging to accurately simulate, and the distribution of sound types may be hard to replicate. In this paper, we propose a completely unsupervised method, mixture invariant training (MixIT), that requires only single-channel acoustic mixtures. In MixIT, training examples are constructed by mixing together existing mixtures, and the model separates them into a variable number of latent sources, such that the separated sources can be remixed to approximate the original mixtures. We show that MixIT can achieve competitive performance compared to supervised methods on speech separation. Using MixIT in a semi-supervised learning setting enables unsupervised domain adaptation and learning from large amounts of real world data without ground-truth source waveforms. In particular, we significantly improve reverberant speech separation performance by incorporating reverberant mixtures, train a speech enhancement system from noisy mixtures, and improve universal sound separation by incorporating a large amount of in-the-wild data.

Recent advances in text-to-speech (TTS) models show impressive speech naturalness and quality, yet the role of large-scale open data in driving this progress remains underexplored. In this work, we introduce Raon-OpenTTS, an open TTS model that performs competitively with state-of-the-art closed-data TTS models, and Raon-OpenTTS-Pool, a large-scale open dataset for reproducible TTS training. Raon-OpenTTS-Pool consists of 615K hours of 240M speech segments aggregated from publicly available English speech corpora and web-sourced recordings. With a model-based filtering pipeline applied to Raon-OpenTTS-Pool, we derive Raon-OpenTTS-Core, a curated, high-quality subset of 510K hours and 194M speech segments. Using Raon-OpenTTS-Core, we train Raon-OpenTTS, a series of diffusion transformer (DiT)-based TTS models from 0.3B to 1B parameters. On multiple benchmarks, Raon-OpenTTS-1B shows comparable performance to state-of-the-art models such as Qwen3-TTS and CosyVoice 3, which are trained on several million hours of proprietary speech data. Notably, on Seed-TTS-Eval, Raon-OpenTTS-1B achieves a word error rate (WER) of 1.78% and a speaker similarity (SIM) of 0.749, ranking second on WER and first on SIM among recent open-weight TTS baselines. On CV3-Hard-EN, Raon-OpenTTS-1B achieves a WER of 6.15% and a SIM of 0.775, ranking first on both metrics. Furthermore, to support robust evaluation, we introduce Raon-OpenTTS-Eval, a structured benchmark for assessing TTS robustness across diverse acoustic conditions including clean, noisy, in-the-wild, and expressive speech. On Raon-OpenTTS-Eval, Raon-OpenTTS-1B achieves the best average WER and SIM among all evaluated models, and the second-best human preference, as measured by comparative mean opinion score (CMOS). Our data pool, filtering pipeline, training code, and checkpoints are publicly available at https://github.com/krafton-ai/RAON-OpenTTS.

Recent advances in sequence modeling have significantly improved ASR systems, bringing them close to human-level recognition accuracy and enhancing robustness across diverse acoustic conditions and languages. In contrast, Forced Alignment has not experienced comparable progress, and traditional HMM-GMM frameworks remain widely adopted and highly competitive. To address this gap, we propose an end-to-end, fully differentiable neural architecture specifically designed for phoneme alignment. The model consists of an encoder that processes the input signal and a decoder that produces alignment decisions. The encoder is structured into two complementary branches: one dedicated to phoneme identity verification and the other to phoneme boundary detection. The decoder is implemented as a trainable module based on differentiable soft dynamic programming. The entire system is optimized end-to-end using a novel contrastive loss that encourages clear separation between steady-state phoneme regions and transition boundaries. The proposed approach outperforms the current state of the art in phoneme alignment on hand-annotated English benchmarks, achieves strong word-level generalization results, and demonstrates generalization on unseen languages.

We present Wan-Streamer v0.3, which reframes our native-streaming interaction model under a single organizing view: a video is a world plus an event stream. The world is the persistent context in which a video unfolds, including the environment, scene, subjects, ambient acoustic conditions, voice characteristics, and other relatively stable conditions. The event stream is everything that changes over time within that world, including scene or environmental changes, subject behavior, speech, and other sounds. This yields a general-purpose pretraining task over large amounts of real video: given a world and incoming input, predict how the world moves, changes, and responds in real time. The resulting competence can be specialized to a broad family of real-time downstream tasks. We instantiate it on real-time full-duplex audio-visual interaction, where the event stream is the agent's speech together with free-form behavior. Functionally, the model's multimodal understanding process is vision-language-action-like: it maps multimodal user input to language-form speech and behavior actions. Wan-Streamer v0.3 preserves the v0.2 operating point: 640x368 video at 25 FPS, a 160 ms streaming unit, approximately 200 ms model-side response latency, and approximately 550 ms total interaction latency under a 350 ms bidirectional network budget.

Recently, deep neural network (DNN)-based speech enhancement (SE) systems have been used with great success. During training, such systems require clean speech data - ideally, in large quantity with a variety of acoustic conditions, many different speaker characteristics and for a given sampling rate (e.g., 48kHz for fullband SE). However, obtaining such clean speech data is not straightforward - especially, if only considering publicly available datasets. At the same time, a lot of material for automatic speech recognition (ASR) with the desired acoustic/speaker/sampling rate characteristics is publicly available except being clean, i.e., it also contains background noise as this is even often desired in order to have ASR systems that are noise-robust. Hence, using such data to train SE systems is not straightforward. In this paper, we propose two improvements to train SE systems on noisy speech data. First, we propose several modifications of the loss functions, which make them robust against noisy speech targets. In particular, computing the median over the sample axis before averaging over time-frequency bins allows to use such data. Furthermore, we propose a noise augmentation scheme for mixture-invariant training (MixIT), which allows using it also in such scenarios. For our experiments, we use the Mozilla Common Voice dataset and we show that using our robust loss function improves PESQ by up to 0.19 compared to a system trained in the traditional way. Similarly, for MixIT we can see an improvement of up to 0.27 in PESQ when using our proposed noise augmentation.

Recent advancements in generative speech models based on audio-text prompts have enabled remarkable innovations like high-quality zero-shot text-to-speech. However, existing models still face limitations in handling diverse audio-text speech generation tasks involving transforming input speech and processing audio captured in adverse acoustic conditions. This paper introduces SpeechX, a versatile speech generation model capable of zero-shot TTS and various speech transformation tasks, dealing with both clean and noisy signals. SpeechX combines neural codec language modeling with multi-task learning using task-dependent prompting, enabling unified and extensible modeling and providing a consistent way for leveraging textual input in speech enhancement and transformation tasks. Experimental results show SpeechX's efficacy in various tasks, including zero-shot TTS, noise suppression, target speaker extraction, speech removal, and speech editing with or without background noise, achieving comparable or superior performance to specialized models across tasks. See https://aka.ms/speechx for demo samples.

We introduce VoiceFilter-Lite, a single-channel source separation model that runs on the device to preserve only the speech signals from a target user, as part of a streaming speech recognition system. Delivering such a model presents numerous challenges: It should improve the performance when the input signal consists of overlapped speech, and must not hurt the speech recognition performance under all other acoustic conditions. Besides, this model must be tiny, fast, and perform inference in a streaming fashion, in order to have minimal impact on CPU, memory, battery and latency. We propose novel techniques to meet these multi-faceted requirements, including using a new asymmetric loss, and adopting adaptive runtime suppression strength. We also show that such a model can be quantized as a 8-bit integer model and run in realtime.

We present MGM-Omni, a unified Omni LLM for omni-modal understanding and expressive, long-horizon speech generation. Unlike cascaded pipelines that isolate speech synthesis, MGM-Omni adopts a "brain-mouth" design with a dual-track, token-based architecture that cleanly decouples multimodal reasoning from real-time speech generation. This design enables efficient cross-modal interaction and low-latency, streaming speech generation. For understanding, a unified training strategy coupled with a dual audio encoder design enables long-form audio perception across diverse acoustic conditions. For generation, a chunk-based parallel decoding scheme narrows the text speech token-rate gap, accelerating inference and supporting streaming zero-shot voice cloning with stable timbre over extended durations. Compared to concurrent work, MGM-Omni achieves these capabilities with markedly data-efficient training. Extensive experiments demonstrate that MGM-Omni outperforms existing open source models in preserving timbre identity across extended sequences, producing natural and context-aware speech, and achieving superior long-form audio and omnimodal understanding. MGM-Omni establishes an efficient, end-to-end paradigm for omnimodal understanding and controllable, personalised long-horizon speech generation.

Vocal recordings on consumer devices commonly suffer from multiple concurrent degradations: noise, reverberation, band-limiting, and clipping. We present Smule Renaissance Small (SRS), a compact single-stage model that performs end-to-end vocal restoration directly in the complex STFT domain. By incorporating phase-aware losses, SRS enables large analysis windows for improved frequency resolution while achieving 10.5x real-time inference on iPhone 12 CPU at 48 kHz. On the DNS 5 Challenge blind set, despite no speech training, SRS outperforms a strong GAN baseline and closely matches a computationally expensive flow-matching system. To enable evaluation under realistic multi-degradation scenarios, we introduce the Extreme Degradation Bench (EDB): 87 singing and speech recordings captured under severe acoustic conditions. On EDB, SRS surpasses all open-source baselines on singing and matches commercial systems, while remaining competitive on speech despite no speech-specific training. We release both SRS and EDB under the MIT License.

Despite progress in video-to-audio generation, the field focuses predominantly on mono output, lacking spatial immersion. Existing binaural approaches remain constrained by a two-stage pipeline that first generates mono audio and then performs spatialization, often resulting in error accumulation and spatio-temporal inconsistencies. To address this limitation, we introduce the task of end-to-end binaural spatial audio generation directly from silent video. To support this task, we present the BiAudio dataset, comprising approximately 97K video-binaural audio pairs spanning diverse real-world scenes and camera rotation trajectories, constructed through a semi-automated pipeline. Furthermore, we propose ViSAudio, an end-to-end framework that employs conditional flow matching with a dual-branch audio generation architecture, where two dedicated branches model the audio latent flows. Integrated with a conditional spacetime module, it balances consistency between channels while preserving distinctive spatial characteristics, ensuring precise spatio-temporal alignment between audio and the input video. Comprehensive experiments demonstrate that ViSAudio outperforms existing state-of-the-art methods across both objective metrics and subjective evaluations, generating high-quality binaural audio with spatial immersion that adapts effectively to viewpoint changes, sound-source motion, and diverse acoustic environments. Project website: https://kszpxxzmc.github.io/ViSAudio-project.

Speaker diarization is the task of partitioning audio into segments according to speaker identity, answering the question of "who spoke when" in multi-speaker conversation recordings. While diarization is an essential task for many downstream applications, it remains an unsolved problem. Errors in diarization propagate to downstream systems and cause wide-ranging failures. To this end, we examine exact failure modes by evaluating five state-of-the-art diarization models, across four diarization datasets spanning multiple languages and acoustic conditions. The evaluation datasets consist of 196.6 hours of multilingual audio, including English, Mandarin, German, Japanese, and Spanish. Overall, we find that PyannoteAI achieves the best performance at 11.2% DER, while DiariZen provides a competitive open-source alternative at 13.3% DER. When analyzing failure cases, we find that the primary cause of diarization errors stem from missed speech segments followed by speaker confusion, especially in high-speaker count settings.

Robust Voice Activity Detection (VAD) remains a challenging task, especially under noisy, diverse, and unseen acoustic conditions. Beyond algorithmic development, a key limitation in advancing VAD research is the lack of large-scale, systematically controlled, and publicly available datasets. To address this, we introduce LibriVAD - a scalable open-source dataset derived from LibriSpeech and augmented with diverse real-world and synthetic noise sources. LibriVAD enables systematic control over speech-to-noise ratio, silence-to-speech ratio (SSR), and noise diversity, and is released in three sizes (15 GB, 150 GB, and 1.5 TB) with two variants (LibriVAD-NonConcat and LibriVAD-Concat) to support different experimental setups. We benchmark multiple feature-model combinations, including waveform, Mel-Frequency Cepstral Coefficients (MFCC), and Gammatone filter bank cepstral coefficients, and introduce the Vision Transformer (ViT) architecture for VAD. Our experiments show that ViT with MFCC features consistently outperforms established VAD models such as boosted deep neural network and convolutional long short-term memory deep neural network across seen, unseen, and out-of-distribution (OOD) conditions, including evaluation on the real-world VOiCES dataset. We further analyze the impact of dataset size and SSR on model generalization, experimentally showing that scaling up dataset size and balancing SSR noticeably and consistently enhance VAD performance under OOD conditions. All datasets, trained models, and code are publicly released to foster reproducibility and accelerate progress in VAD research.

This paper investigates adapting Audio Large Language Models (ALLMs) for speaker verification (SV). We reformulate SV as an audio question-answering task and conduct comprehensive zero-shot evaluations on public benchmarks, showing that current ALLMs have limited zero-shot SV capability and often struggle in diverse acoustic conditions. To address this challenge, we perform supervised fine-tuning on speaker verification data. A rule-based hard pair sampling strategy is proposed to construct more challenging training pairs. Lightweight fine-tuning substantially improves the performance, though there is still a gap between ALLMs and conventional models. Then, we extend to text-dependent SV by jointly querying ALLMs to verify speaker identity and spoken content, yielding results competitive with cascaded ASR-SV systems. Our findings demonstrate that with proper adaptation, ALLMs hold substantial potential as a unified model for robust speaker verification systems, while maintaining the general audio understanding capabilities.

Dysarthric speech quality assessment (DSQA) is critical for clinical diagnostics and inclusive speech technologies. However, subjective evaluation is costly and difficult to scale, and the scarcity of labeled data limits robust objective modeling. To address this, we propose a three-stage framework that leverages unlabeled dysarthric speech and large-scale typical speech datasets to scale training. A teacher model first generates pseudo-labels for unlabeled samples, followed by weakly supervised pretraining using a label-aware contrastive learning strategy that exposes the model to diverse speakers and acoustic conditions. The pretrained model is then fine-tuned for the downstream DSQA task. Experiments on five unseen datasets spanning multiple etiologies and languages demonstrate the robustness of our approach. Our Whisper-based baseline significantly outperforms SOTA DSQA predictors such as SpICE, and the full framework achieves an average SRCC of 0.761 across unseen test datasets.

ASVspoof 5 is the fifth edition in a series of challenges that promote the study of speech spoofing and deepfake attacks, and the design of detection solutions. Compared to previous challenges, the ASVspoof 5 database is built from crowdsourced data collected from a vastly greater number of speakers in diverse acoustic conditions. Attacks, also crowdsourced, are generated and tested using surrogate detection models, while adversarial attacks are incorporated for the first time. New metrics support the evaluation of spoofing-robust automatic speaker verification (SASV) as well as stand-alone detection solutions, i.e., countermeasures without ASV. We describe the two challenge tracks, the new database, the evaluation metrics, baselines, and the evaluation platform, and present a summary of the results. Attacks significantly compromise the baseline systems, while submissions bring substantial improvements.

Audio self-supervised learning (SSL) aims to learn general-purpose representations from large-scale unlabeled audio data. While recent advances have been driven mainly by generative reconstruction objectives, contrastive approaches remain less explored, partly due to the difficulty of designing effective audio augmentations and the large batch sizes required for contrastive pre-training. We introduce AudioMosaic, a contrastive learning-based audio encoder for general audio understanding. During pre-training, AudioMosaic constructs positive pairs by applying structured time-frequency masking to spectrogram patches, which reduces memory usage and enables efficient large-batch training. Compared with generative approaches, the AudioMosaic encoder learns more discriminative utterance-level representations that demonstrate strong transferability across datasets, domains, and acoustic conditions. Extensive experiments show that AudioMosaic achieves state-of-the-art performance on several standard audio benchmarks under both linear probing and fine-tuning. We further show that integrating the pretrained AudioMosaic encoder into audio-language models improves performance on audio-language tasks. The code is publicly available in our https://github.com/HanxunH/AudioMosaic{GitHub repository}.

We introduce Qwen-Audio-VAE, a suite of low-bitrate, fast-encoding continuous audio autoencoders designed for scalable general audio generation. The model is built around a simple but important principle: an audio VAE should not only reconstruct diverse audio with high fidelity, but also produce compact latent representations fast enough to support large-scale text-to-audio training. Qwen-Audio-VAE combines a causal encoder-decoder, window Transformer blocks, and multi-discriminator training to achieve a strong balance between reconstruction quality and compression rate. The model is trained at scale on 5 million hours of multi-domain audio, enabling robust reconstruction across heterogeneous acoustic conditions. To further improve computational efficiency, we adopt an asymmetric encoder-decoder backbone and introduce latency-aware encoder pruning to maximize encoding throughput. Experiments on public speech, music, and sound reconstruction benchmarks show that Qwen-Audio-VAE generalizes well across diverse audio domains and is particularly efficient, requiring only 541 ms to encode 32 minutes of audio. Overall, Qwen-Audio-VAE provides a high-quality, compact, and high-throughput representation backbone for efficient general audio generation.

Audio-visual zooming on mobile devices is fundamentally constrained by limited microphone count, compute resource, unknown array geometry, and weak assumptions on real-world acoustic conditions. We present RDSE: Real-Time Directional Speech Enhancement Framework, a hybrid pipeline that combines traditional signal processing and modern machine learning methods for dual-microphone low-end smartphones. Unlike tightly coupled AV systems that continuously use visual feeds or embeddings, RDSE decouples visual interaction from feature inference, using camera input solely to parameterize the steering vector for spatial filtering. The proposed system uses four modules: dereverberation network, a beamformer with a temporal convolutional network, and a MetricGAN based denoiser. Extensive evaluation on benchmark data and real-world recordings demonstrates effective zooming without precise geometry calibration. Comparative experiments show competitive performance to existing methods. Proposed system is rigorously tested for statistical validity, ablation study, latency profiling, and practicality through real-time live-streaming.

While significant advances have been made with respect to the separation of overlapping speech signals, studies have been largely constrained to mixtures of clean, near anechoic speech, not representative of many real-world scenarios. Although the WHAM! dataset introduced noise to the ubiquitous wsj0-2mix dataset, it did not include reverberation, which is generally present in indoor recordings outside of recording studios. The spectral smearing caused by reverberation can result in significant performance degradation for standard deep learning-based speech separation systems, which rely on spectral structure and the sparsity of speech signals to tease apart sources. To address this, we introduce WHAMR!, an augmented version of WHAM! with synthetic reverberated sources, and provide a thorough baseline analysis of current techniques as well as novel cascaded architectures on the newly introduced conditions.

We introduce the first Natural Office Talkers in Settings of Far-field Audio Recordings (``NOTSOFAR-1'') Challenge alongside datasets and baseline system. The challenge focuses on distant speaker diarization and automatic speech recognition (DASR) in far-field meeting scenarios, with single-channel and known-geometry multi-channel tracks, and serves as a launch platform for two new datasets: First, a benchmarking dataset of 315 meetings, averaging 6 minutes each, capturing a broad spectrum of real-world acoustic conditions and conversational dynamics. It is recorded across 30 conference rooms, featuring 4-8 attendees and a total of 35 unique speakers. Second, a 1000-hour simulated training dataset, synthesized with enhanced authenticity for real-world generalization, incorporating 15,000 real acoustic transfer functions. The tasks focus on single-device DASR, where multi-channel devices always share the same known geometry. This is aligned with common setups in actual conference rooms, and avoids technical complexities associated with multi-device tasks. It also allows for the development of geometry-specific solutions. The NOTSOFAR-1 Challenge aims to advance research in the field of distant conversational speech recognition, providing key resources to unlock the potential of data-driven methods, which we believe are currently constrained by the absence of comprehensive high-quality training and benchmarking datasets.

Wearable devices such as AI glasses are transforming voice assistants into always-available, hands-free collaborators that integrate seamlessly with daily life, but they also introduce challenges like egocentric audio affected by motion and noise, rapid micro-interactions, and the need to distinguish device-directed speech from background conversations. Existing benchmarks largely overlook these complexities, focusing instead on clean or generic conversational audio. To bridge this gap, we present WearVox, the first benchmark designed to rigorously evaluate voice assistants in realistic wearable scenarios. WearVox comprises 3,842 multi-channel, egocentric audio recordings collected via AI glasses across five diverse tasks including Search-Grounded QA, Closed-Book QA, Side-Talk Rejection, Tool Calling, and Speech Translation, spanning a wide range of indoor and outdoor environments and acoustic conditions. Each recording is accompanied by rich metadata, enabling nuanced analysis of model performance under real-world constraints. We benchmark leading proprietary and open-source speech Large Language Models (SLLMs) and find that most real-time SLLMs achieve accuracies on WearVox ranging from 29% to 59%, with substantial performance degradation on noisy outdoor audio, underscoring the difficulty and realism of the benchmark. Additionally, we conduct a case study with two new SLLMs that perform inference with single-channel and multi-channel audio, demonstrating that multi-channel audio inputs significantly enhance model robustness to environmental noise and improve discrimination between device-directed and background speech. Our results highlight the critical importance of spatial audio cues for context-aware voice assistants and establish WearVox as a comprehensive testbed for advancing wearable voice AI research.

A soundscape is composed of three types of sound: biophony (sounds made by animals), geophony (natural abiotic sounds) and anthropophony (sounds made by humans). A key research question in the field of soundscape ecology is how these components interact with each other, specifically how biophony responds to geophony and anthropophony. Nevertheless, as of today, there are not many analytical instruments that enable the distinct quantification of these elements. Recent machine learning (ML) approaches aim to support automated analysis but often rely on task-specific or clean data, limiting generalisation to noisy passive acoustic monitoring (PAM) recordings. This study presents a clear and reproducible structure to build ML models for coarse soundscape classification and introduces CoarseSoundNet, a deep learning model trained to distinguish biophony, geophony, and anthropophony under realistic PAM conditions. We systematically investigate model architectures, the influence of an additional training class, data composition, and evaluation strategies. Our findings suggest that model performance improves with additional PAM data, especially when similar to the target domain, and by introducing an explicit silence class during training. Class-specific decision thresholds and duration-based constraints further enhance performance, particularly for anthropophony and geophony. Error analyses exhibit challenges for anthropophony due to masking effects and confusions for silence and insect sounds for geophony and biophony. Finally, we conduct an ecological case study which shows that pre-filtering recordings with CoarseSoundNet yields acoustic index trends comparable to ground-truth filtering, supporting its use as an effective preprocessing tool for ecoacoustic analyses.

This paper introduces the first standardized benchmark for evaluating Automatic Speech Recognition (ASR) in the Bambara language, utilizing one hour of professionally recorded Malian constitutional text. Designed as a controlled reference set under near-optimal acoustic and linguistic conditions, the benchmark was used to evaluate 37 models, ranging from Bambara-trained systems to large-scale commercial models. Our findings reveal that current ASR performance remains significantly below deployment standards in a narrow formal domain; the top-performing system in terms of Word Error Rate (WER) achieved 46.76\% and the best Character Error Rate (CER) of 13.00\% was set by another model, while several prominent multilingual models exceeded 100\% WER. These results suggest that multilingual pre-training and model scaling alone are insufficient for underrepresented languages. Furthermore, because this dataset represents a best-case scenario of the most simplified and formal form of spoken Bambara, these figures are yet to be tested against practical, real-world settings. We provide the benchmark and an accompanying public leaderboard to facilitate transparent evaluation and future research in Bambara speech technology.

Respiratory acoustic foundation models (FMs) are benchmarked exclusively on smartphone recordings, yet clinical deployment increasingly targets body-coupled (BC) wearables whose sensors attenuate high-frequency content through tissue and bone, leaving FM reliability uncharacterised. We introduce BCoughBench, evaluating five FMs (OPERA-CT/CE/GT, HeAR, M2D+Resp) on nine classification tasks (AUROC, sensitivity at 95% specificity, Expected Calibration Error) and three age regression tasks (MAE vs. a mean-predictor baseline) across five EBEN-simulated BC sensor conditions on five labeled cough datasets. Mean AUROC declines from 0.785 (smartphone) to 0.689-0.723, degrading most under temple vibration pickup (Δ = -0.096) and least under the soft in-ear (Δ = -0.062). No FM meets the clinical sensitivity threshold (Se@Sp95 geq 0.20) on most disease tasks under any BC sensor. Sex classification on the CIDRZ cohort collapses (AUROC 0.954 to 0.596-0.628, Δ = -0.341) while COVID detection is nearly unaffected (Δ = -0.004). Age regression is robust, improving under the forehead accelerometer on CoughVID (MAE 9.61 to 8.97 yr); HeAR leads on regression and demographic tasks, M2D+Resp on disease and characteristic tasks. BCoughBench provides a reproducible framework for FM evaluation under wearable conditions.

Audio Large Language Models (Audio LLMs) are embedded in agents for smart homes, vehicles, wearables, and embodied systems, where acoustic inputs can propagate from perception into persistent state and consequential execution. This setting extends security analysis beyond model behavior to the system conditions that determine how acoustic inputs can influence agent behavior and external actions. Existing surveys examine acoustic security, LLM-based agents, and edge deployment in isolation, leaving their security interactions in deployed Audio LLM-based agents insufficiently characterized. This survey introduces an Acoustic Sensing-to-Action (S2A) system model that traces these security implications along the path from acoustic sensing to external execution, while accounting for edge-cloud runtime and lifecycle transformation. We use the model to synthesize attacks, defenses, and evaluation methods across the acoustic, agent, and edge-system literature. The synthesis shows that security gaps can emerge within components and at the transitions between stages, where protections developed for one stage do not necessarily provide end-to-end assurance in the deployed system. These findings motivate security evaluation that follows acoustic influence from sensing to action across persistent state, system boundaries, and changing deployment conditions in real-world agents.

Modern optical mouse sensors, with their advanced precision and high responsiveness, possess an often overlooked vulnerability: they can be exploited for side-channel attacks. This paper introduces Mic-E-Mouse, the first-ever side-channel attack that targets high-performance optical mouse sensors to covertly eavesdrop on users. We demonstrate that audio signals can induce subtle surface vibrations detectable by a mouse's optical sensor. Remarkably, user-space software on popular operating systems can collect and broadcast this sensitive side channel, granting attackers access to raw mouse data without requiring direct system-level permissions. Initially, the vibration signals extracted from mouse data are of poor quality due to non-uniform sampling, a non-linear frequency response, and significant quantization. To overcome these limitations, Mic-E-Mouse employs a sophisticated end-to-end data filtering pipeline that combines Wiener filtering, resampling corrections, and an innovative encoder-only spectrogram neural filtering technique. We evaluate the attack's efficacy across diverse conditions, including speaking volume, mouse polling rate and DPI, surface materials, speaker languages, and environmental noise. In controlled environments, Mic-E-Mouse improves the signal-to-noise ratio (SNR) by up to +19 dB for speech reconstruction. Furthermore, our results demonstrate a speech recognition accuracy of roughly 42% to 61% on the AudioMNIST and VCTK datasets. All our code and datasets are publicly accessible on https://sites.google.com/view/mic-e-mouse.

Acoustic events are sounds with well-defined spectro-temporal characteristics which can be associated with the physical objects generating them. Acoustic scenes are collections of such acoustic events in no specific temporal order. Given this natural linkage between events and scenes, a common belief is that the ability to classify events must help in the classification of scenes. This has led to several efforts attempting to do well on Acoustic Event Tagging (AET) and Acoustic Scene Classification (ASC) using a multi-task network. However, in these efforts, improvement in one task does not guarantee an improvement in the other, suggesting a tension between ASC and AET. It is unclear if improvements in AET translates to improvements in ASC. We explore this conundrum through an extensive empirical study and show that under certain conditions, using AET as an auxiliary task in the multi-task network consistently improves ASC performance. Additionally, ASC performance further improves with the AET data-set size and is not sensitive to the choice of events or the number of events in the AET data-set. We conclude that this improvement in ASC performance comes from the regularization effect of using AET and not from the network's improved ability to discern between acoustic events.

Language model (LM)-based speech enhancement (SE) can generate natural-sounding speech, but under severe noise it often suffers from unreliable conditioning, leading to perceptually plausible yet linguistically incorrect outputs. To address this issue, we propose L3-SE, a noise-invariant acoustic-semantic distillation framework for reducing linguistic hallucination in LM-based SE. The proposed method learns a noise-invariant conditioning encoder from noisy speech by jointly distilling two complementary clean-speech targets: an acoustic target for reconstruction fidelity and a semantic target for linguistic consistency. The resulting noise-invariant acoustic-semantic representations are used to condition a decoder-only autoregressive language model, which predicts clean acoustic tokens that are decoded into enhanced speech. To support high-quality generation, we further employ a high-fidelity codec built on learnable weighted WavLM layer representations as the discrete acoustic interface. By improving the reliability of conditioning under adverse conditions, the proposed framework substantially reduces hallucination and improves content faithfulness. Experiments show that the proposed method consistently outperforms prior LM-based speech enhancement baselines on linguistic consistency metrics, with especially clear gains under low-SNR and reverberant conditions, while maintaining competitive perceptual quality. Audio samples are available at https://max1wz.github.io/L3-SE-Demo-Page/. The complete source code will be released after the manuscript is accepted.

The large integration of microphones into devices increases the opportunities for Acoustic Side-Channel Attacks (ASCAs), as these can be used to capture keystrokes' audio signals that might reveal sensitive information. However, the current State-Of-The-Art (SOTA) models for ASCAs, including Convolutional Neural Networks (CNNs) and hybrid models, such as CoAtNet, still exhibit limited robustness under realistic noisy conditions. Solving this problem requires either: (i) an increased model's capacity to infer contextual information from longer sequences, allowing the model to learn that an initially noisily typed word is the same as a futurely collected non-noisy word, or (ii) an approach to fix misidentified information from the contexts, as one does not type random words, but the ones that best fit the conversation context. In this paper, we demonstrate that both strategies are viable and complementary solutions for making ASCAs practical. We observed that no existing solution leverages advanced transformer architectures' power for these tasks and propose that: (i) Visual Transformers (VTs) are the candidate solutions for capturing long-term contextual information and (ii) transformer-powered Large Language Models (LLMs) are the candidate solutions to fix the ``typos'' (mispredictions) the model might make. Thus, we here present the first-of-its-kind approach that integrates VTs and LLMs for ASCAs. We first show that VTs achieve SOTA performance in classifying keystrokes when compared to the previous CNN benchmark. Second, we demonstrate that LLMs can mitigate the impact of real-world noise. Evaluations on the natural sentences revealed that: (i) incorporating LLMs (e.g., GPT-4o) in our ASCA pipeline boosts the performance of error-correction tasks; and (ii) the comparable performance can be attained by a lightweight, fine-tuned smaller LLM (67 times smaller than GPT-4o), using...

Speech codecs that convert continuous speech signals into discrete tokens have become essential for speech language models (SLMs). However, existing codecs struggle to balance high-quality reconstruction with semantically rich representations, limiting their effectiveness in both generative and understanding tasks. In this work, we propose SAC, a neural speech codec with semantic-acoustic dual-stream quantization. By disentangling semantic and acoustic modeling into two dedicated streams, SAC enables each to be optimized for its respective role. Comprehensive evaluations show that SAC achieves strong reconstruction performance across diverse bitrates under both clean and noisy conditions, with particularly high scores on UTMOS and WER, demonstrating superior perceptual quality and intelligibility. Moreover, SAC substantially outperforms state-of-the-art codecs in semantic representation, achieving a level comparable to that of self-supervised learning (SSL) continuous embeddings. Finally, our analysis of speech disentanglement highlights the effectiveness of the dual-stream design, offering new potential for controllable speech applications.

Flow matching (FM) enables high-fidelity generation, while self-supervised learning (SSL) speech models provide hierarchical representations spanning acoustic and phonetic levels. However, existing FM-based speech enhancement (SE) methods operate primarily in the spectral domain, treating SSL features only as external conditions rather than modeling directly in the SSL latent space. To fully exploit the structural richness of SSL representations, we propose PhASE-Flow, an FM-based SE framework that operates entirely in the SSL space. It models the conditional distribution of clean acoustic representations given phonetic ones, reconstructing the waveform via a neural vocoder. Experiments show that PhASE-Flow outperforms state-of-the-art baselines in perceptual quality and intelligibility. Notably, it achieves competitive performance with only four sampling steps, enabling highly efficient inference. Audio demos are available at https://anonymous.4open.science/w/phase-flow_demo-E6E1/.

The ICASSP 2021 Acoustic Echo Cancellation Challenge is intended to stimulate research in the area of acoustic echo cancellation (AEC), which is an important part of speech enhancement and still a top issue in audio communication and conferencing systems. Many recent AEC studies report good performance on synthetic datasets where the train and test samples come from the same underlying distribution. However, the AEC performance often degrades significantly on real recordings. Also, most of the conventional objective metrics such as echo return loss enhancement (ERLE) and perceptual evaluation of speech quality (PESQ) do not correlate well with subjective speech quality tests in the presence of background noise and reverberation found in realistic environments. In this challenge, we open source two large datasets to train AEC models under both single talk and double talk scenarios. These datasets consist of recordings from more than 2,500 real audio devices and human speakers in real environments, as well as a synthetic dataset. We open source two large test sets, and we open source an online subjective test framework for researchers to quickly test their results. The winners of this challenge will be selected based on the average Mean Opinion Score (MOS) achieved across all different single talk and double talk scenarios.

Spoken query retrieval is an important interaction mode in modern information retrieval. However, existing evaluation datasets are often limited to simple queries under constrained noise conditions, making them inadequate for assessing the robustness of spoken query retrieval systems under complex acoustic perturbations. To address this limitation, we present SQuTR, a robustness benchmark for spoken query retrieval that includes a large-scale dataset and a unified evaluation protocol. SQuTR aggregates 37,317 unique queries from six commonly used English and Chinese text retrieval datasets, spanning multiple domains and diverse query types. We synthesize speech using voice profiles from 200 real speakers and mix 17 categories of real-world environmental noise under controlled SNR levels, enabling reproducible robustness evaluation from quiet to highly noisy conditions. Under the unified protocol, we conduct large-scale evaluations on representative cascaded and end-to-end retrieval systems. Experimental results show that retrieval performance decreases as noise increases, with substantially different drops across systems. Even large-scale retrieval models struggle under extreme noise, indicating that robustness remains a critical bottleneck. Overall, SQuTR provides a reproducible testbed for benchmarking and diagnostic analysis, and facilitates future research on robustness in spoken query to text retrieval.

Mobile robots operating in unknown urban environments encounter a wide range of complex terrains to which they must adapt their planned trajectory for safe and efficient navigation. Most existing approaches utilize supervised learning to classify terrains from either an exteroceptive or a proprioceptive sensor modality. However, this requires a tremendous amount of manual labeling effort for each newly encountered terrain as well as for variations of terrains caused by changing environmental conditions. In this work, we propose a novel terrain classification framework leveraging an unsupervised proprioceptive classifier that learns from vehicle-terrain interaction sounds to self-supervise an exteroceptive classifier for pixel-wise semantic segmentation of images. To this end, we first learn a discriminative embedding space for vehicle-terrain interaction sounds from triplets of audio clips formed using visual features of the corresponding terrain patches and cluster the resulting embeddings. We subsequently use these clusters to label the visual terrain patches by projecting the traversed tracks of the robot into the camera images. Finally, we use the sparsely labeled images to train our semantic segmentation network in a weakly supervised manner. We present extensive quantitative and qualitative results that demonstrate that our proprioceptive terrain classifier exceeds the state-of-the-art among unsupervised methods and our self-supervised exteroceptive semantic segmentation model achieves a comparable performance to supervised learning with manually labeled data.

This paper presents the development and characterization of a fiber laser hydrophone designed for deep-sea applications, with a focus on detecting neutrino interactions via their acoustic signatures. The hydrophone design includes a static pressure compensation mechanism, ensuring reliable operation at depths exceeding 1 km. The performance of the hydrophone was evaluated through laboratory tests and experiments in an anechoic basin, where its transfer function was measured before and after a 140-bar pressure cycle. The results show that the hydrophone maintains its sensitivity, with resonance peaks identified in both low- and high-frequency ranges. The hydrophone's sensitivity to acoustic signals was also compared to ambient sea state noise levels, demonstrating compatibility with the lowest noise conditions.

Current state of the art acoustic models can easily comprise more than 100 million parameters. This growing complexity demands larger training datasets to maintain a decent generalization of the final decision function. An ideal dataset is not necessarily large in size, but large with respect to the amount of unique speakers, utilized hardware and varying recording conditions. This enables a machine learning model to explore as much of the domain-specific input space as possible during parameter estimation. This work introduces Common Phone, a gender-balanced, multilingual corpus recorded from more than 11.000 contributors via Mozilla's Common Voice project. It comprises around 116 hours of speech enriched with automatically generated phonetic segmentation. A Wav2Vec 2.0 acoustic model was trained with the Common Phone to perform phonetic symbol recognition and validate the quality of the generated phonetic annotation. The architecture achieved a PER of 18.1 % on the entire test set, computed with all 101 unique phonetic symbols, showing slight differences between the individual languages. We conclude that Common Phone provides sufficient variability and reliable phonetic annotation to help bridging the gap between research and application of acoustic models.

Unmanned aerial vehicles (UAVs), commonly known as drones, are increasingly used across diverse domains, including logistics, agriculture, surveillance, and defense. While these systems provide numerous benefits, their misuse raises safety and security concerns, making effective detection mechanisms essential. Acoustic sensing offers a low-cost and non-intrusive alternative to vision or radar-based detection, as drone propellers generate distinctive sound patterns. This study introduces AUDRON (AUdio-based Drone Recognition Network), a hybrid deep learning framework for drone sound detection, employing a combination of Mel-Frequency Cepstral Coefficients (MFCC), Short-Time Fourier Transform (STFT) spectrograms processed with convolutional neural networks (CNNs), recurrent layers for temporal modeling, and autoencoder-based representations. Feature-level fusion integrates complementary information before classification. Experimental evaluation demonstrates that AUDRON effectively differentiates drone acoustic signatures from background noise, achieving high accuracy while maintaining generalizability across varying conditions. AUDRON achieves 98.51 percent and 97.11 percent accuracy in binary and multiclass classification. The results highlight the advantage of combining multiple feature representations with deep learning for reliable acoustic drone detection, suggesting the framework's potential for deployment in security and surveillance applications where visual or radar sensing may be limited.

Acoustic Echo Cancellation (AEC) is essential for accurate recognition of queries spoken to a smart speaker that is playing out audio. Previous work has shown that a neural AEC model operating on log-mel spectral features (denoted "logmel" hereafter) can greatly improve Automatic Speech Recognition (ASR) accuracy when optimized with an auxiliary loss utilizing a pre-trained ASR model encoder. In this paper, we develop a conformer-based waveform-domain neural AEC model inspired by the "TasNet" architecture. The model is trained by jointly optimizing Negative Scale-Invariant SNR (SISNR) and ASR losses on a large speech dataset. On a realistic rerecorded test set, we find that cascading a linear adaptive AEC and a waveform-domain neural AEC is very effective, giving 56-59% word error rate (WER) reduction over the linear AEC alone. On this test set, the 1.6M parameter waveform-domain neural AEC also improves over a larger 6.5M parameter logmel-domain neural AEC model by 20-29% in easy to moderate conditions. By operating on smaller frames, the waveform neural model is able to perform better at smaller sizes and is better suited for applications where memory is limited.

Understanding emotion from speech requires sensitivity to both lexical and acoustic cues. However, it remains unclear whether large audio language models (LALMs) genuinely process acoustic information or rely primarily on lexical content. We present LISTEN (Lexical vs. Acoustic Speech Test for Emotion in Narratives), a controlled benchmark designed to disentangle lexical reliance from acoustic sensitivity in emotion understanding. Across evaluations of six state-of-the-art LALMs, we observe a consistent lexical dominance. Models predict "neutral" when lexical cues are neutral or absent, show limited gains under cue alignment, and fail to classify distinct emotions under cue conflict. In paralinguistic settings, performance approaches chance. These results indicate that current LALMs largely "transcribe" rather than "listen," relying heavily on lexical semantics while underutilizing acoustic cues. LISTEN offers a principled framework for assessing emotion understanding in multimodal models.

Audio language models can recognize spoken commands and invoke tools, but an agent must first decide whether the acoustic and conversational context warrants action. We introduce VGBench, a 1,018-item diagnostic benchmark for action-level addressedness across side-talk, self-talk, and speaker-switch scenarios. Each item uses a shared action space comprising silence, a tool call, and a natural-language answer. Speaker-switch pairs hold the specified words fixed while source, distance rendering, and a temporal boundary define a controlled wearer-to-bystander shift. Six raw Audio LLMs and three training-free adaptations often identify the target tool yet rarely withhold action under this shift; the highest raw switch mute rate is 14%. We then use VoxGate as a post-training case study. Supervised training mutes 91.3% of switched commands while choosing the correct tool for all nearby wearer commands and text-only controls. An exploratory GRPO stage has similar switch performance; side-talk accuracy rises from 68.4% to 70.9%, and self-talk muting from 52.0% to 60.0%. Factorized controls identify an independent source-change effect, while sensitivity to the far-field manipulation varies across acoustic renderings. The benchmark therefore measures multi-cue acoustic-context gating rather than isolated speaker identity.

A large and growing amount of speech content in real-life scenarios is being recorded on consumer-grade devices in uncontrolled environments, resulting in degraded speech quality. Transforming such low-quality device-degraded speech into high-quality speech is a goal of speech enhancement (SE). This paper introduces a new speech dataset, DDS, to facilitate the research on SE. DDS provides aligned parallel recordings of high-quality speech (recorded in professional studios) and a number of versions of low-quality speech, producing approximately 2,000 hours speech data. The DDS dataset covers 27 realistic recording conditions by combining diverse acoustic environments and microphone devices, and each version of a condition consists of multiple recordings from six microphone positions to simulate different noise and reverberation levels. We also test several SE baseline systems on the DDS dataset and show the impact of recording diversity on performance.

In conversational AI, detecting when a speaker has finished talking is crucial for natural turn taking. While recent work incorporates semantics, the relative contribution of different modalities remains unclear. We present a controlled ablation of acoustic, prosodic, and semantic signals for streaming end of turn detection using a lightweight trimodal classifier. Under identical training conditions, the acoustic prosodic combination achieves the best balance of accuracy and latency, achieving utterance F1 of 0.93 with 7.8% false alarms at 400ms median latency. Adding text increases premature detections without improving performance. Feature space analysis confirms that prosodic features have the strongest class separability, while text representations overlap substantially. These findings suggest that turn-taking is primarily conveyed through intonation and silence patterns rather than semantic completeness, enabling faster and more reliable systems without expensive text inference.

A unified audio model must recognize and understand linguistic, paralinguistic, and environmental information while supporting speech synthesis and editing. A key challenge is representation: understanding favors compact features suited to long-context modeling, whereas speech generation requires reconstructible features that preserve fine-grained acoustic detail. We introduce FireRedAudio, a general-purpose audio language model with a shared 9B-parameter LLM. To the best of our knowledge, it is the first publicly disclosed unified audio-language model to provide separate continuous input representations for understanding and generation within a single trainable autoregressive LLM. Audio to be recognized or analyzed is processed by a dedicated Audio Encoder, while speech inputs for generation use a RedAE-based pathway. The LLM directly generates text or conditions a flow-matching DiT to produce continuous acoustic latents. Through progressive multitask training, FireRedAudio supports ASR and audio understanding, with the latter extending to recordings of up to one hour, as well as zero-shot TTS, Instruct TTS, and semantic and acoustic speech editing. Its structured organization of long-form audio achieves second-level timestamp accuracy. Across comprehensive evaluations, FireRedAudio achieves competitive or leading performance in audio understanding and multilingual ASR, strong content accuracy and speaker preservation in zero-shot TTS, leading instruction following in Instruct TTS, and substantial improvements over Ming-UniAudio-Edit in both semantic and acoustic speech editing. These results demonstrate the viability of decoupled continuous input representations for unifying audio understanding and continuous-latent speech generation in a model of moderate scale. Our code is available at https://github.com/FireRedTeam/FireRedAudio.

Creating universal speaker encoders which are robust for different acoustic and speech duration conditions is a big challenge today. According to our observations systems trained on short speech segments are optimal for short phrase speaker verification and systems trained on long segments are superior for long segments verification. A system trained simultaneously on pooled short and long speech segments does not give optimal verification results and usually degrades both for short and long segments. This paper addresses the problem of creating universal speaker encoders for different speech segments duration. We describe our simple recipe for training universal speaker encoder for any type of selected neural network architecture. According to our evaluation results of wav2vec-TDNN based systems obtained for NIST SRE and VoxCeleb1 benchmarks the proposed universal encoder provides speaker verification improvements in case of different enrollment and test speech segment duration. The key feature of the proposed encoder is that it has the same inference time as the selected neural network architecture.

Speaker identification in multilingual settings presents unique challenges, particularly when conventional models are predominantly trained on English data. In this paper, we propose WSI (Whisper Speaker Identification), a framework that repurposes the encoder of the Whisper automatic speech recognition model pre trained on extensive multilingual data to generate robust speaker embeddings via a joint loss optimization strategy that leverages online hard triplet mining and self supervised Normalized Temperature-scaled Cross Entropy loss. By capitalizing on Whisper language-agnostic acoustic representations, our approach effectively distinguishes speakers across diverse languages and recording conditions. Extensive evaluations on multiple corpora, including VoxTube (multilingual), JVS (Japanese), CallHome (German, Spanish, Chinese, and Japanese), and Voxconverse (English), demonstrate that WSI consistently outperforms state-of-the-art baselines, namely Pyannote Embedding, ECAPA TDNN, and Xvector, in terms of lower equal error rates and higher AUC scores. These results validate our hypothesis that a multilingual pre-trained ASR encoder, combined with joint loss optimization, substantially improves speaker identification performance in non-English languages.

Autonomous vehicles increasingly utilize the vision-based perception module to acquire information about driving environments and detect obstacles. Correct detection and classification are important to ensure safe driving decisions. Existing works have demonstrated the feasibility of fooling the perception models such as object detectors and image classifiers with printed adversarial patches. However, most of them are indiscriminately offensive to every passing autonomous vehicle. In this paper, we propose TPatch, a physical adversarial patch triggered by acoustic signals. Unlike other adversarial patches, TPatch remains benign under normal circumstances but can be triggered to launch a hiding, creating or altering attack by a designed distortion introduced by signal injection attacks towards cameras. To avoid the suspicion of human drivers and make the attack practical and robust in the real world, we propose a content-based camouflage method and an attack robustness enhancement method to strengthen it. Evaluations with three object detectors, YOLO V3/V5 and Faster R-CNN, and eight image classifiers demonstrate the effectiveness of TPatch in both the simulation and the real world. We also discuss possible defenses at the sensor, algorithm, and system levels.

Discrete speech tokenizers aim to disentangle semantic from acoustic information, yet targets from self-supervised learning (SSL) models like HuBERT retain non-linguistic variation: speaker identity, prosody, and channel conditions leak into the tokens, inflating entropy. Our key insight is that when enough speakers utter the same words under varying conditions, linguistic content is the only shared factor. We propose PINT (Parallel INvariant Tokenization), which fine-tunes an SSL encoder with alignment losses across parallel utterances and augmentations to distill this shared residual. PINT collapses identical words onto consistent token sequences, drastically reducing conditional entropy. Unlike ASR text, PINT tokens preserve frame-level temporal grounding and serve as drop-in semantic targets for audio codecs. Experiments show a 98.7% relative reduction in speaker probe accuracy (93.1% to 1.2%), a 42% lower ABX error rate, and 27-30% lower LM perplexity versus baselines, confirming that the right invariance is key to efficient learning.

The recent large-scale text-to-speech (TTS) systems are usually grouped as autoregressive and non-autoregressive systems. The autoregressive systems implicitly model duration but exhibit certain deficiencies in robustness and lack of duration controllability. Non-autoregressive systems require explicit alignment information between text and speech during training and predict durations for linguistic units (e.g. phone), which may compromise their naturalness. In this paper, we introduce Masked Generative Codec Transformer (MaskGCT), a fully non-autoregressive TTS model that eliminates the need for explicit alignment information between text and speech supervision, as well as phone-level duration prediction. MaskGCT is a two-stage model: in the first stage, the model uses text to predict semantic tokens extracted from a speech self-supervised learning (SSL) model, and in the second stage, the model predicts acoustic tokens conditioned on these semantic tokens. MaskGCT follows the mask-and-predict learning paradigm. During training, MaskGCT learns to predict masked semantic or acoustic tokens based on given conditions and prompts. During inference, the model generates tokens of a specified length in a parallel manner. Experiments with 100K hours of in-the-wild speech demonstrate that MaskGCT outperforms the current state-of-the-art zero-shot TTS systems in terms of quality, similarity, and intelligibility. Audio samples are available at https://maskgct.github.io/.

Blind room impulse response (RIR) estimation is a core task for capturing and transferring acoustic properties; yet existing methods often suffer from limited modeling capability and degraded performance under unseen conditions. Moreover, emerging generative audio applications call for more flexible impulse response generation methods. We propose Gencho, a diffusion-transformer-based model that predicts complex spectrogram RIRs from reverberant speech. A structure-aware encoder leverages isolation between early and late reflections to encode the input audio into a robust representation for conditioning, while the diffusion decoder generates diverse and perceptually realistic impulse responses from it. Gencho integrates modularly with standard speech processing pipelines for acoustic matching. Results show richer generated RIRs than non-generative baselines while maintaining strong performance in standard RIR metrics. We further demonstrate its application to text-conditioned RIR generation, highlighting Gencho's versatility for controllable acoustic simulation and generative audio tasks.

Advancements in deep neural networks have allowed automatic speech recognition (ASR) systems to attain human parity on several publicly available clean speech datasets. However, even state-of-the-art ASR systems experience performance degradation when confronted with adverse conditions, as a well-trained acoustic model is sensitive to variations in the speech domain, e.g., background noise. Intuitively, humans address this issue by relying on their linguistic knowledge: the meaning of ambiguous spoken terms is usually inferred from contextual cues thereby reducing the dependency on the auditory system. Inspired by this observation, we introduce the first open-source benchmark to utilize external large language models (LLMs) for ASR error correction, where N-best decoding hypotheses provide informative elements for true transcription prediction. This approach is a paradigm shift from the traditional language model rescoring strategy that can only select one candidate hypothesis as the output transcription. The proposed benchmark contains a novel dataset, HyPoradise (HP), encompassing more than 334,000 pairs of N-best hypotheses and corresponding accurate transcriptions across prevalent speech domains. Given this dataset, we examine three types of error correction techniques based on LLMs with varying amounts of labeled hypotheses-transcription pairs, which gains a significant word error rate (WER) reduction. Experimental evidence demonstrates the proposed technique achieves a breakthrough by surpassing the upper bound of traditional re-ranking based methods. More surprisingly, LLM with reasonable prompt and its generative capability can even correct those tokens that are missing in N-best list. We make our results publicly accessible for reproducible pipelines with released pre-trained models, thus providing a new evaluation paradigm for ASR error correction with LLMs.

Generative modeling has recently achieved remarkable success across text, image, and audio domains, demonstrating powerful capabilities for unified representation learning. However, audio generation models still face challenges in terms of audio quality and generalization ability across tasks. This fragmentation results in redundant development efforts, inconsistent performance, and limited extensibility. To address these issues, we propose UniTok-Audio, a scalable and extensible framework for unified audio generation tasks. Specifically, 1) UniTok-Audio extracts continuous feature of conditions to generates discrete tokens of target audio in an autoregressive manner; 2) a special task identifier token unifies different learning patterns of multiple tasks in a single framework; 3) a dual-stream audio codec involving acoustic and semantic branch is developed for high-fidelity waveform reconstruction. Experimental results demonstrate that UniTok-Audio achieves competitive performance in comparation with state-of-the-art task-specific or multi-task systems across five time-aligned tasks: speech restoration, target speaker extraction, speech separation, voice conversion, and language-queried audio source separation. To foster future research, we will open-source our codebase. The demo page of our work can be found here: https://alibaba.github.io/unified-audio.

Audio deepfake detection systems trained on one dataset often fail when deployed on data from different sources due to distributional shifts in recording conditions, synthesis methods, and acoustic environments. We present a modular pipeline for unsupervised domain adaptation that combines pre-trained Wav2Vec 2.0 embeddings with statistical transformations to improve cross-domain generalization without requiring labeled target data. Our approach applies power transformation for feature normalization, ANOVA-based feature selection, joint PCA for domain-agnostic dimensionality reduction, and CORAL alignment to match source and target covariance structures before classification via logistic regression. We evaluate on two cross-domain transfer scenarios: ASVspoof 2019 LA to Fake-or-Real (FoR) and FoR to ASVspoof, achieving 62.7--63.6\% accuracy with balanced performance across real and fake classes. Systematic ablation experiments reveal that feature selection (+3.5%) and CORAL alignment (+3.2%) provide the largest individual contributions, with the complete pipeline improving accuracy by 10.7% over baseline. While performance is modest compared to within-domain detection (94-96%), our pipeline offers transparency and modularity, making it suitable for deployment scenarios requiring interpretable decisions.

Factory machinery is prone to failure or breakdown, resulting in significant expenses for companies. Hence, there is a rising interest in machine monitoring using different sensors including microphones. In the scientific community, the emergence of public datasets has led to advancements in acoustic detection and classification of scenes and events, but there are no public datasets that focus on the sound of industrial machines under normal and anomalous operating conditions in real factory environments. In this paper, we present a new dataset of industrial machine sounds that we call a sound dataset for malfunctioning industrial machine investigation and inspection (MIMII dataset). Normal sounds were recorded for different types of industrial machines (i.e., valves, pumps, fans, and slide rails), and to resemble a real-life scenario, various anomalous sounds were recorded (e.g., contamination, leakage, rotating unbalance, and rail damage). The purpose of releasing the MIMII dataset is to assist the machine-learning and signal-processing community with their development of automated facility maintenance. The MIMII dataset is freely available for download at: https://zenodo.org/record/3384388

We introduce C3LLM (Conditioned-on-Three-Modalities Large Language Models), a novel framework combining three tasks of video-to-audio, audio-to-text, and text-to-audio together. C3LLM adapts the Large Language Model (LLM) structure as a bridge for aligning different modalities, synthesizing the given conditional information, and making multimodal generation in a discrete manner. Our contributions are as follows. First, we adapt a hierarchical structure for audio generation tasks with pre-trained audio codebooks. Specifically, we train the LLM to generate audio semantic tokens from the given conditions, and further use a non-autoregressive transformer to generate different levels of acoustic tokens in layers to better enhance the fidelity of the generated audio. Second, based on the intuition that LLMs were originally designed for discrete tasks with the next-word prediction method, we use the discrete representation for audio generation and compress their semantic meanings into acoustic tokens, similar to adding "acoustic vocabulary" to LLM. Third, our method combines the previous tasks of audio understanding, video-to-audio generation, and text-to-audio generation together into one unified model, providing more versatility in an end-to-end fashion. Our C3LLM achieves improved results through various automated evaluation metrics, providing better semantic alignment compared to previous methods.

Crafting an effective Automatic Speech Recognition (ASR) solution for dialects demands innovative approaches that not only address the data scarcity issue but also navigate the intricacies of linguistic diversity. In this paper, we address the aforementioned ASR challenge, focusing on the Tunisian dialect. First, textual and audio data is collected and in some cases annotated. Second, we explore self-supervision, semi-supervision and few-shot code-switching approaches to push the state-of-the-art on different Tunisian test sets; covering different acoustic, linguistic and prosodic conditions. Finally, and given the absence of conventional spelling, we produce a human evaluation of our transcripts to avoid the noise coming from spelling inadequacies in our testing references. Our models, allowing to transcribe audio samples in a linguistic mix involving Tunisian Arabic, English and French, and all the data used during training and testing are released for public use and further improvements.

Audio-Visual Speech Recognition (AVSR) leverages both acoustic and visual information for robust recognition under noise. However, how models balance these modalities remains unclear. We present Dr. SHAP-AV, a framework using Shapley values to analyze modality contributions in AVSR. Through experiments on six models across two benchmarks and varying SNR levels, we introduce three analyses: Global SHAP for overall modality balance, Generative SHAP for contribution dynamics during decoding, and Temporal Alignment SHAP for input-output correspondence. Our findings reveal that models shift toward visual reliance under noise yet maintain high audio contributions even under severe degradation. Modality balance evolves during generation, temporal alignment holds under noise, and SNR is the dominant factor driving modality weighting. These findings expose a persistent audio bias, motivating ad-hoc modality-weighting mechanisms and Shapley-based attribution as a standard AVSR diagnostic.

Word-level forced alignment estimates when each transcript word occurs in an audio recording. It underpins text-based media editing, subtitling, speech-data curation, and phonetic analysis. Existing evaluations understate the difficulty of forced alignment by relying on short, clean speech, perfect transcripts, and metrics that obscure consequential alignment errors. In contrast, real-world media and data-processing pipelines operate on long and diverse recordings. Additionally, forced aligners often operate on error-prone automatic speech recognition (ASR) output. We address these gaps with improved evaluation metrics, a scoring protocol for real ASR transcripts, and AlignBench, a benchmark spanning diverse speaker, acoustic, and text conditions. We further introduce FuseAlign, a transformer-based aligner trained on large-scale pseudo-labeled speech with online label correction. FuseAlign performs joint contextualization of audio and text for the localization of coarse words. The model then refines boundaries at millisecond resolution and detects missing transcript words in the audio without lexicon-based or Viterbi decoding. On AlignBench, FuseAlign substantially outperforms all baselines and remains robust under real ASR transcripts. Ablations show that convolutional upsampling and EMA-snapshot label correction matter more than model properties such as parameter count.

Historical films suffer from co-occurring visual and audio degradations---blur, noise, flicker, hiss, clipping, and dropout---yet existing methods restore each modality independently, leaving quality gaps and cross-modal inconsistency. We present OmniVR, the first joint audio-video generative restoration model. Built upon a 22B-parameter audio-video generation backbone, OmniVR formulates restoration as conditional generation within a unified multimodal DiT: the low-quality video and audio are encoded as latent conditions, combined with a fixed restoration prompt, and jointly denoised to recover visual structure, temporal motion, and acoustic detail under one coordinated objective. Three key designs enable this adaptation: (1) a joint audio-video degradation pipeline that simulates real old-film characteristics from Internet-collected data; (2) an architecture-preserving text-to-audio-video (T2AV) to audio-video-to-audio-video (AV2AV) transition with prompt annealing that maximally retains the generative prior; and (3) first-frame image-to-video (I2V) anchoring with loss reweighting and waveform supervision for long-video extrapolation and audio fidelity. We also propose OmniVRBench, the first benchmark that evaluates audio-video restoration across visual quality, audio quality, temporal consistency, and audio-visual synchrony on 200 real historical clips. OmniVR surpasses all prior methods on all six visual metrics, achieves the best audio quality, and produces natural colorization---the first method to jointly address all three aspects. Code and weights will be publicly released. Project Page: https://xin1u.github.io/OminiVR_PAGE/

We present a family of open-source Music Foundation Models designed to advance large-scale music understanding and generation across diverse tasks and modalities. Our framework consists of four major components: (1) HeartCLAP, an audio-text alignment model; (2) HeartTranscriptor, a robust lyric recognition model optimized for real-world music scenarios; and (3) HeartCodec, a low-frame-rate (12.5 Hz) yet high-fidelity music codec tokenizer that captures long-range musical structure while preserving fine-grained acoustic details and enabling efficient autoregressive modeling; (4) HeartMuLa, an LLM-based song generation model capable of synthesizing high-fidelity music under rich, user-controllable conditions (e.g., textual style descriptions, lyrics, and reference audio). In addition, it provides two specialized modes: (i) fine-grained musical attribute control, which allows users to specify the style of different song sections (e.g., intro, verse, chorus) using natural language prompts; and (ii) short, engaging music generation, which is suitable as background music for short videos. Lastly, HeartMuLa improves significantly when scaled to 7B parameters. For the first time, we show that a Suno-level, commercial-grade system can be reproduced using academic-scale data and GPU resources. We expect these foundation models to serve as strong baselines for future research and to facilitate practical applications in multimodal content production.

We introduce AuK, an open-source foundational model that unifies speech generation and editing through a common interface of natural-language instructions and audio context. To support this broad capability set, we construct approximately 3.03 billion instruction--audio instances and 1.95 million hours of effective supervision across five task families: speech generation, content editing, enhancement and separation, paralinguistic editing, and acoustic editing. AuK combines a multimodal large language model for semantic conditioning, an VAE jointly trained on speech, general audio, and music for acoustic conditioning, and a hybrid rectified-flow Transformer that performs dual-stream MMDiT blocks followed by unified single-stream DiT blocks for generation. Training begins with generation-only warm-up and proceeds to joint generation--editing pre-training. We then apply complementary post-training strategies: human-feedback preference optimization for open-ended editing and reward-based reinforcement learning for speech generation. To reduce inference cost, we further distill the model with consistency initialization and task-routed Decoupled DMD. The resulting AuK-Flash performs 4-step inference without classifier-free guidance and achieves a 4.5 wall-clock speedup over the full model under matched conditions. Experiments demonstrate leading performance on zero-shot and instruction-controlled speech generation and general instruction-guided editing, while remaining competitive on signal-level restoration tasks. We release both the source code and model weights to support reproducibility and further research.

Recent advances in Diffusion Transformers (DiTs) have enabled high-quality joint audio-video generation, producing videos with synchronized audio within a single model. However, existing controllable generation frameworks are typically restricted to video-only control. This restricts comprehensive controllability and often leads to suboptimal cross-modal alignment. To bridge this gap, we present MMControl, which enables users to perform Multi-Modal Control in joint audio-video generation. MMControl introduces a dual-stream conditional injection mechanism. It incorporates both visual and acoustic control signals, including reference images, reference audio, depth maps, and pose sequences, into a joint generation process. These conditions are injected through bypass branches into a joint audio-video Diffusion Transformer, enabling the model to simultaneously generate identity-consistent video and timbre-consistent audio under structural constraints. Furthermore, we introduce modality-specific guidance scaling, which allows users to independently and dynamically adjust the influence strength of each visual and acoustic condition at inference time. Extensive experiments demonstrate that MMControl achieves fine-grained, composable control over character identity, voice timbre, body pose, and scene layout in joint audio-video generation.

A room's acoustic properties are a product of the room's geometry, the objects within the room, and their specific positions. A room's acoustic properties can be characterized by its impulse response (RIR) between a source and listener location, or roughly inferred from recordings of natural signals present in the room. Variations in the positions of objects in a room can effect measurable changes in the room's acoustic properties, as characterized by the RIR. Existing datasets of RIRs either do not systematically vary positions of objects in an environment, or they consist of only simulated RIRs. We present SoundCam, the largest dataset of unique RIRs from in-the-wild rooms publicly released to date. It includes 5,000 10-channel real-world measurements of room impulse responses and 2,000 10-channel recordings of music in three different rooms, including a controlled acoustic lab, an in-the-wild living room, and a conference room, with different humans in positions throughout each room. We show that these measurements can be used for interesting tasks, such as detecting and identifying humans, and tracking their positions.

We consider the scattering of acoustic perturbations in a presence of a flow. We suppose that the space can be split into a zone where the flow is uniform and a zone where the flow is potential. In the first zone, we apply a Prandtl-Glauert transformation to recover the Helmholtz equation. The well-known setting of boundary element method for the Helmholtz equation is available. In the second zone, the flow quantities are space dependent, we have to consider a local resolution, namely the finite element method. Herein, we carry out the coupling of these two methods and present various applications and validation test cases. The source term is given through the decomposition of an incident acoustic field on a section of the computational domain's boundary.

This report presents the dataset and baseline of Task 3 of the DCASE2021 Challenge on Sound Event Localization and Detection (SELD). The dataset is based on emulation of real recordings of static or moving sound events under real conditions of reverberation and ambient noise, using spatial room impulse responses captured in a variety of rooms and delivered in two spatial formats. The acoustical synthesis remains the same as in the previous iteration of the challenge, however the new dataset brings more challenging conditions of polyphony and overlapping instances of the same class. The most important difference of the new dataset is the introduction of directional interferers, meaning sound events that are localized in space but do not belong to the target classes to be detected and are not annotated. Since such interfering events are expected in every real-world scenario of SELD, the new dataset aims to promote systems that deal with this condition effectively. A modified SELDnet baseline employing the recent ACCDOA representation of SELD problems accompanies the dataset and it is shown to outperform the previous one. The new dataset is shown to be significantly more challenging for both baselines according to all considered metrics. To investigate the individual and combined effects of ambient noise, interferers, and reverberation, we study the performance of the baseline on different versions of the dataset excluding or including combinations of these factors. The results indicate that by far the most detrimental effects are caused by directional interferers.

Information on liquid jet stream flow is crucial in many real world applications. In a large number of cases, these flows fall directly onto free surfaces (e.g. pools), creating a splash with accompanying splashing sounds. The sound produced is supplied by energy interactions between the liquid jet stream and the passive free surface. In this investigation, we collect the sound of a water jet of varying flowrate falling into a pool of water, and use this sound to predict the flowrate and flowrate trajectory involved. Two approaches are employed: one uses machine-learning models trained using audio features extracted from the collected sound to predict the flowrate (and subsequently the flowrate trajectory). In contrast, the second method directly uses acoustic parameters related to the spectral energy of the liquid-liquid interaction to estimate the flowrate trajectory. The actual flowrate, however, is determined directly using a gravimetric method: tracking the change in mass of the pooling liquid over time. We show here that the two methods agree well with the actual flowrate and offer comparable performance in accurately predicting the flowrate trajectory, and accordingly offer insights for potential real-life applications using sound.

Removing background noise from speech audio has been the subject of considerable effort, especially in recent years due to the rise of virtual communication and amateur recordings. Yet background noise is not the only unpleasant disturbance that can prevent intelligibility: reverb, clipping, codec artifacts, problematic equalization, limited bandwidth, or inconsistent loudness are equally disturbing and ubiquitous. In this work, we propose to consider the task of speech enhancement as a holistic endeavor, and present a universal speech enhancement system that tackles 55 different distortions at the same time. Our approach consists of a generative model that employs score-based diffusion, together with a multi-resolution conditioning network that performs enhancement with mixture density networks. We show that this approach significantly outperforms the state of the art in a subjective test performed by expert listeners. We also show that it achieves competitive objective scores with just 4-8 diffusion steps, despite not considering any particular strategy for fast sampling. We hope that both our methodology and technical contributions encourage researchers and practitioners to adopt a universal approach to speech enhancement, possibly framing it as a generative task.

The vocal music of each language carries a distinctive sonic identity, even without instrumental accompaniment. We ask whether these differences are measurable and traceable to specific phonemes. To tackle this question, we introduce phoneme-conditional analysis, which isolates the acoustic effect of typologically distinctive phonemes by comparing marker syllables against matched non-marker controls within the same song, holding singer, melody, and genre constant. Across nine typologically diverse languages and thousands of songs, we measure effects along five acoustic dimensions. Song-level profiles built from these effects identify the language of an unaccompanied vocal at 85.5% balanced accuracy in a nine-way classification with folds grouped by artist; whether the separability arises by accumulation of the phoneme-local effects themselves is left open. Our findings suggest that phonological structure leaves systematic and measurable traces in how each language is sung.

The task of Visual Sound Source Localization (VSSL) involves identifying the location of sound sources in visual scenes, integrating audio-visual data for enhanced scene understanding. Despite advancements in state-of-the-art (SOTA) models, we observe three critical flaws: i) The evaluation of the models is mainly focused in sounds produced by objects that are visible in the image, ii) The evaluation often assumes a prior knowledge of the size of the sounding object, and iii) No universal threshold for localization in real-world scenarios is established, as previous approaches only consider positive examples without accounting for both positive and negative cases. In this paper, we introduce a novel test set and metrics designed to complete the current standard evaluation of VSSL models by testing them in scenarios where none of the objects in the image corresponds to the audio input, i.e. a negative audio. We consider three types of negative audio: silence, noise and offscreen. Our analysis reveals that numerous SOTA models fail to appropriately adjust their predictions based on audio input, suggesting that these models may not be leveraging audio information as intended. Additionally, we provide a comprehensive analysis of the range of maximum values in the estimated audio-visual similarity maps, in both positive and negative audio cases, and show that most of the models are not discriminative enough, making them unfit to choose a universal threshold appropriate to perform sound localization without any a priori information of the sounding object, that is, object size and visibility.

The average predictability (aka informativity) of a word in context has been shown to condition word duration (Seyfarth, 2014). All else being equal, words that tend to occur in more predictable environments are shorter than words that tend to occur in less predictable environments. One account of the informativity effect on duration is that the acoustic details of probabilistic reduction are stored as part of a word's mental representation. Other research has argued that predictability effects are tied to prosodic structure in integral ways. With the aim of assessing a potential prosodic basis for informativity effects in speech production, this study extends past work in two directions; it investigated informativity effects in another large language, Mandarin Chinese, and broadened the study beyond word duration to additional acoustic dimensions, pitch and intensity, known to index prosodic prominence. The acoustic information of content words was extracted from a large telephone conversation speech corpus with over 400,000 tokens and 6,000 word types spoken by 1,655 individuals and analyzed for the effect of informativity using frequency statistics estimated from a 431 million word subtitle corpus. Results indicated that words with low informativity have shorter durations, replicating the effect found in English. In addition, informativity had significant effects on maximum pitch and intensity, two phonetic dimensions related to prosodic prominence. Extending this interpretation, these results suggest that predictability is closely linked to prosodic prominence, and that the lexical representation of a word includes phonetic details associated with its average prosodic prominence in discourse. In other words, the lexicon absorbs prosodic influences on speech production.

Soundscape augmentation is an emerging approach for noise mitigation by introducing additional sounds known as "maskers" to increase acoustic comfort. Traditionally, the choice of maskers is often predicated on expert guidance or post-hoc analysis which can be time-consuming and sometimes arbitrary. Moreover, this often results in a static set of maskers that are inflexible to the dynamic nature of real-world acoustic environments. Overcoming the inflexibility of traditional soundscape augmentation is twofold. First, given a snapshot of a soundscape, the system must be able to select an optimal masker without human supervision. Second, the system must also be able to react to changes in the acoustic environment with near real-time latency. In this work, we harness the combined prowess of cloud computing and the Internet of Things (IoT) to allow in-situ listening and playback using microcontrollers while delegating computationally expensive inference tasks to the cloud. In particular, a serverless cloud architecture was used for inference, ensuring near real-time latency and scalability without the need to provision computing resources. A working prototype of the system is currently being deployed in a public area experiencing high traffic noise, as well as undergoing public evaluation for future improvements.

Effectively steering hearable devices requires understanding the acoustic environment around the user. In the computational analysis of sound scenes, foundation models have emerged as the state of the art to produce high-performance, robust, multi-purpose audio representations. We introduce and release Deep Evaluation of Audio Representations (DEAR), the first dataset and benchmark to evaluate the efficacy of foundation models in capturing essential acoustic properties for hearables. The dataset includes 1,158 audio tracks, each 30 seconds long, created by spatially mixing proprietary monologues with commercial, high-quality recordings of everyday acoustic scenes. Our benchmark encompasses eight tasks that assess the general context, speech sources, and technical acoustic properties of the audio scenes. Through our evaluation of four general-purpose audio representation models, we demonstrate that the BEATs model significantly surpasses its counterparts. This superiority underscores the advantage of models trained on diverse audio collections, confirming their applicability to a wide array of auditory tasks, including encoding the environment properties necessary for hearable steering. The DEAR dataset and associated code are available at https://dear-dataset.github.io.

In daily life, people hear speech, footsteps, and music around them. We can often recognize these sounds and judge where they come from. Each sound source can be shown on a separate acoustic map, a rectangular image covering 360^{circ} horizontally and 180^{circ} vertically. The map shows the directions occupied by the source as a region and the sound energy within that region. A class label identifies the sound. Predicting these labeled acoustic maps from audio is called semantic acoustic imaging. Such maps could help robots perceive their surroundings and allow augmented reality displays to show sound regions and classes over the real world. Existing models can recognize sound classes and estimate a direction for each source. However, a direction alone does not describe the source region or its energy. Acoustic imaging must also distinguish sound sources in nearby directions, while the number of active sources and the regions they occupy can change over time. We therefore propose the Semantic Acoustic Imaging Detector (SAID), which predicts a separate labeled acoustic map for each active source from audio. First, we pretrain Audio2Sph, SAID's audio encoder, through sound energy estimation across directions without class labels. Then, we train the complete SAID model to predict source regions, energy, and classes together. We also develop a pipeline that generates simulated recordings for pretraining and supports fine-tuning on real recordings. On the official DCASE2026 Task 3 Track A evaluation set, our submitted system ranks first with 0.1080 macro-averaged mean average precision (Macro mAP) and 0.3962 Macro Pearson r. Demos and code are provided at https://github.com/IN03X/SAID.

Most automatic speech processing systems are sensitive to the acoustic environment, with degraded performance when applied to noisy or reverberant speech. But how can one tell whether speech is noisy or reverberant? We propose Brouhaha, a pipeline to simulate audio segments recorded in noisy and reverberant conditions. We then use the simulated audio to jointly train the Brouhaha model for voice activity detection, signal-to-noise ratio estimation, and C50 room acoustics prediction. We show how the predicted SNR and C50 values can be used to investigate and help diagnose errors made by automatic speech processing tools (such as pyannote.audio for speaker diarization or OpenAI's Whisper for automatic speech recognition). Both our pipeline and a pretrained model are open source and shared with the speech community.

The INTERSPEECH 2020 Deep Noise Suppression Challenge is intended to promote collaborative research in real-time single-channel Speech Enhancement aimed to maximize the subjective (perceptual) quality of the enhanced speech. A typical approach to evaluate the noise suppression methods is to use objective metrics on the test set obtained by splitting the original dataset. Many publications report reasonable performance on the synthetic test set drawn from the same distribution as that of the training set. However, often the model performance degrades significantly on real recordings. Also, most of the conventional objective metrics do not correlate well with subjective tests and lab subjective tests are not scalable for a large test set. In this challenge, we open-source a large clean speech and noise corpus for training the noise suppression models and a representative test set to real-world scenarios consisting of both synthetic and real recordings. We also open source an online subjective test framework based on ITU-T P.808 for researchers to quickly test their developments. The winners of this challenge will be selected based on subjective evaluation on a representative test set using P.808 framework.

Soundscape augmentation or "masking" introduces wanted sounds into the acoustic environment to improve acoustic comfort. Usually, the masker selection and playback strategies are either arbitrary or based on simple rules (e.g. -3 dBA), which may lead to sub-optimal increment or even reduction in acoustic comfort for dynamic acoustic environments. To reduce ambiguity in the selection of maskers, an automatic masker selection system (AMSS) was recently developed. The AMSS uses a deep-learning model trained on a large-scale dataset of subjective responses to maximize the derived ISO pleasantness (ISO 12913-2). Hence, this study investigates the short-term in situ performance of the AMSS implemented in a gazebo in an urban park. Firstly, the predicted ISO pleasantness from the AMSS is evaluated in comparison to the in situ subjective evaluation scores. Secondly, the effect of various masker selection schemes on the perceived affective quality and appropriateness would be evaluated. In total, each participant evaluated 6 conditions: (1) ambient environment with no maskers; (2) AMSS; (3) bird and (4) water masker from prior art; (5) random selection from same pool of maskers used to train the AMSS; and (6) selection of best-performing maskers based on the analysis of the dataset used to train the AMSS.

We release the EARS (Expressive Anechoic Recordings of Speech) dataset, a high-quality speech dataset comprising 107 speakers from diverse backgrounds, totaling in 100 hours of clean, anechoic speech data. The dataset covers a large range of different speaking styles, including emotional speech, different reading styles, non-verbal sounds, and conversational freeform speech. We benchmark various methods for speech enhancement and dereverberation on the dataset and evaluate their performance through a set of instrumental metrics. In addition, we conduct a listening test with 20 participants for the speech enhancement task, where a generative method is preferred. We introduce a blind test set that allows for automatic online evaluation of uploaded data. Dataset download links and automatic evaluation server can be found online.